tuning in cairns?

[wogstyler]

I had a look at your profile, you listed some of the parts fitted. A full realtime ECU conversion for my car was worth $1800 roughly.I swear by them. Well keep everyone up to date with how you go, I'm interested to see the end result.

yeah will do but it going to be a while until i get it sorted as i loosing license and cant get car to cairns :bang:

 

[Blown VYSS]

For LS1 tuning you cant go past SVS

 

[etechremapping]

how much ?!?!?!

yeah i have and they burning another chip for me and sending it down to me. I told them i want at least half my money back and they never see or hear from me again. Last night i finally went for drive while it wasnt rainin and give it a very little and in 3rd now it seems to pull but the all of a sudden it looses boost and stops pullin hard. I dont know wy they do this as a job hay. I cant stress enough how unhappy I am hay. The tune cost me 1500 and I think it wsa a complete waste of money!!!!!!!!!!!!!
And for them to be having troubles with 2 or 3 other commodores, at least i know it not my car.
I been on to this other guy who has fixed a couple of cape yorks cars but i gotta spend another 2500 to get it right which is f&$ked in the arse considering the trouble and money i been threw so far. Plus i live a hour drive away from all these shops and it big inconvience wen without wheel for a week at a time and also very fustrating!!!!!!!!!!!!!
:cry:

Guys I'm new to Cairns and have set up a tuning company. We are Viezu Technology Authorised and hold the North QLD Territory for them. They are about the biggest and best globally which is why we chose them. Check out their website, or ours www . etechremapping . com

At the moment we only do COMMODORE VZ 3.6 V6 but I've asked the technical center to get hold of some more vehicles in the range and get some proper bespoke mapping over here for me. They're working on it. Give us a shout if you are still looking. And we guarantee we'll be a lot cheaper than you're used to paying.

Give me a shout on our website if you need
:idea3:

 

[Michelson4301]

Looked at your website. Am i correct in assuming this is a generic tuning solution ? Ie. You as the end user of the software can't actually change individual parameters ?

 

[WogBoyz]

Wow didnt realise there were so many cairns members on here

 

[Michelson4301]

I Have bought the 2/3 bar mafless programs for VS-Vy V6's and have most of the VN-VS stuff (V6&V8). Are people looking for custom tunes at the moment ?

 

[Ross D.]

holly heck you seem to winge alot. you should of been straight up with cape york and iam sure they would have done their best to fix it.

 

[etechremapping]

Looked at your website. Am i correct in assuming this is a generic tuning solution ? Ie. You as the end user of the software can't actually change individual parameters ?

Not sure why this didn't show up on my radar sorry. But on a better note things are taking off nicely !

Yeah we have a range of tuning solutions as an Authorised Dealer for Viezu worldwide. The tuning is undetectable re-flashing of the ECU. For petrol and diesel. There is a new website launched now.

Unfortunately the local metal we can tune is limited although we're working on it. It's developed on rolling roads per ECU type but can be made fully bespoke to your vehicle so can take account of any mods etc. Although modern ECUs are great and can generally adjust themselves up to 7% for induction and 11% on exhaust perfectly.

A range of mapping types are available depending on fuel type - Max economy, blends, max performance, motorsport hard-mapping and race team specialist mapping. Bespoke tuning which will win the power war. And backed by $3mil insurance. We have 300 world wide dealers but are new to Australia. And hoping to get around very quickly of course. Tuning in Europe is hot competition wise and I'm bringing the prices here. Viezu will be getting hold of local stuff for me and will develop mapping for the major sellers so I can cover the whole of Australia via out V-Switch device which can hold up to 3 map files and you can easily switch between them.

But no - the end user can not mess with anything - leave that to the industry specialists I say !

Any queries give me a shout - and check out the new site now we're fully up and running:

eTech Remapping. Bespoke engine remapping, v-switch, Veizu authorised dealer

Cheers,

Simon :surprise:

I've found out how to enable email alerts so will be straight back to you guys if you need anything !

 

[etechremapping]

Looked at your website. Am i correct in assuming this is a generic tuning solution ? Ie. You as the end user of the software can't actually change individual parameters ?

Not sure why this didn't show up on my radar sorry. But on a better note things are taking off nicely !

Yeah we have a range of tuning solutions as an Authorised Dealer for Viezu worldwide. The tuning is undetectable re-flashing of the ECU. For petrol and diesel. There is a new website launched now.

Unfortunately the local metal we can tune is limited although we're working on it. It's developed on rolling roads per ECU type but can be made fully bespoke to your vehicle so can take account of any mods etc. Although modern ECUs are great and can generally adjust themselves up to 7% for induction and 11% on exhaust perfectly.

A range of mapping types are available depending on fuel type - Max economy, blends, max performance, motorsport hard-mapping and race team specialist mapping. Bespoke tuning which will win the power war. And backed by $3mil insurance. We have 300 world wide dealers but are new to Australia. And hoping to get around very quickly of course. Tuning in Europe is hot competition wise and I'm bringing the prices here. Viezu will be getting hold of local stuff for me and will develop mapping for the major sellers so I can cover the whole of Australia via out V-Switch device which can hold up to 3 map files and you can easily switch between them.

But no - the end user can not mess with anything - leave that to the industry specialists I say !

Any queries give me a shout - and check out the new site now we're fully up and running:

eTech Remapping. Bespoke engine remapping, v-switch, Veizu authorised dealer

Cheers,

Simon :surprise:

I've found out how to enable email alerts so will be straight back to you guys if you need anything !