VPRob
Well-Known Member
- Joined
- Feb 10, 2011
- Messages
- 1,120
- Reaction score
- 196
- Points
- 63
- Location
- nowra, NSW
- Members Ride
- VP executive sedan V6
So, I'm going up to Wollongong tomorrow to get the tailshaft balanced by an engineering firm that specialises in doing them. Quoted me $143 to do it.
I'm sick of mucking around with it and can't get rid of the vibration. Tried 2 positions at the diff flange and one is better than the other but I'm not going to start splitting the CV join and playing with the phasing cos that could take forever and the only thing I might achieve is to shake my fillings loose.
I'll post again once the balanced shaft is in the car
I'm sick of mucking around with it and can't get rid of the vibration. Tried 2 positions at the diff flange and one is better than the other but I'm not going to start splitting the CV join and playing with the phasing cos that could take forever and the only thing I might achieve is to shake my fillings loose.
I'll post again once the balanced shaft is in the car