vp lower ball joint

[VP-57-TT]

Hi guys does anyone on here know if there is a lower control arm ball joint that will fit into a VP LCA that is the same as a VR-VS lower ball joint. mainly asking as I want to utilise the later model hub setup for more suspension options

 

[vc commodore]

No....The VP balljoint presses in, where the VR/VS style bolt into the lower control arm....The lower control arm shape is also different

 

[VP-57-TT]

I know the VP one presses in and the VR ones bolt up. but what I was wondering if anyone knows of a press in type ball joint that will fit in the vp arm that is similar to the VS style of joint where there is no thread on the ball joint

 

[vc commodore]

Try AU onwards Balljoints......Whilst I have never tried this conversion, they have the balljoint style you're asking about

 

[VP-57-TT]

will give the AU Ball joints a try

 

[VPRob]

keep us posted on your discoveries please

 

[VP-57-TT]

Will post updates with my findings soon

 

[VP-57-TT]

Have looked into this and AU falcon ones wont work. Been trying to get my hands on a spare set of vp lower arms to test whether a series 1 vt ball joint will fit into the location nicely

 

[VR38]

May I ask why?

 

[VP-57-TT]

May I ask why?

To utilise the better brake amd suspension options available i can get a coil over that has the vp strut top on a vr vs strut assembly