UW1SH
New Member
- Joined
- Oct 15, 2011
- Messages
- 866
- Reaction score
- 5
- Points
- 0
- Location
- Brisbane
- Members Ride
- VR 5speed With ecotec conversion
Hi so im putting a ecotec motor into my vr commodore and iv heard i can run the ecotec off the vr computer (factory manual) il be putting the t5 manual box from the vr behind the ecotec so im wondering if i could use the VR V6 manual computer and wiring harness to run the ecotec i know its needs to be changed from a map sensor to maf would this happen in a memcal re tune?? also what else needs to be done for it to run good or would it just be cheaper and easyer to buy this off ebay. im just considering buying this kit as it has the performance tune and rev limiter bumped up. but id do it the other way if it works out cheaper and easyer in the long run.. cheers any help would be appreciated.
Holden Commodore VS V6 auto to T5 manual conversion kit | eBay
ALSO i know its been covered but im completely confused because iv been told the flywheel needs to be balanced but also been told it doesnt because its been done before and some people said its impossible to run ecotec off vr ecu since completely diff motors etc etc so just thought i would post this to see what anyone else has to say that could help
Holden Commodore VS V6 auto to T5 manual conversion kit | eBay
ALSO i know its been covered but im completely confused because iv been told the flywheel needs to be balanced but also been told it doesnt because its been done before and some people said its impossible to run ecotec off vr ecu since completely diff motors etc etc so just thought i would post this to see what anyone else has to say that could help
Last edited: