VS fuel and temp gauge intermittent

[Scottmac276]

No this board?

I did resolver all contact

 

[Scottmac276]

I can’t work out why there is no power going to the gauge. I have checked continuity from the cabin to the fuel sender, it’s good

 

[ephect]

Are you getting a varied resistance reading from the sender depending on fuel level?

 

[07GTS]

first question is are u getting 10v on the sender wire when disconnected ? if so then dash has power to it, if its more then 10v then u most likely have lost earth to the dash, if u have no 10v power at sender wire then test the cluster the back has all the pin details on it just make sure a power track hasnt warn thru or something like that