Vs v6 ute sitting lower on one driver side

[Dog_of_a_v6]

Bent lower control arm?

I'll have a look I couldn't see anything like that the other day tho

 

[BowTie]

Seizing shock?

 

[_R_J_K_]

Is it actually sitting lower or is it actually that one wheel further inward than the other? You got an adjustable panhard rod?

 

[BowTie]

Binding upper or lower trailing arm bushes?

F, im full of guesses tonight.

 

[Dog_of_a_v6]

Is it actually sitting lower or is it actually that one wheel further inward than the other? You got an adjustable panhard rod?

The car sits higher on the back passenger side and yes I just put a adjustable panhard rod in about 4 days ago

 

[BowTie]

Id jump on towbar as a quick check that nothing on that side is siezed. Would be noticeable to hold one side that high.

 

[Dog_of_a_v6]

Id jump on towbar as a quick check that nothing on that side is siezed. Would be noticeable to hold one side that high.

The driverside didn't seem to give as much but both sides still move

 

[BowTie]

Ok. Are you positive you're on level ground? It matters.

Also, you haven't by chance replaced sway bar link pins recently have ya? They need to be dialled exactly with some designs to not twist your setup.

 

[BowTie]

The driverside didn't seem to give as much but both sides still move

Sounds right. Drivers side is compressed more at the moment so should be a bit stiffer than the other one.

 

[Dog_of_a_v6]

Ok. Are you positive you're on level ground? It matters.

Also, you haven't by chance replaced sway bar link pins recently have ya? They need to be dialled exactly with some designs to not twist your setup.

I done both the front sway bar link pins bushes and today I was at repco and even the guy there said it was sitting uneven