VT Calais Seat's Move 20mm

[Gazza2005au]

Hi guy'show do i fix both front seat's VT Calais v6 they both slide 20mm i have just been knocked back on rego check

 

[Gazza2005au]

Here is my problem anyone know if there is a bushing for this pin?

https://tinypic.host/image/20231020-214014.E9qzZ

 

[rambunctious]

No idea what you are referring to but if it is the elongated hole with the pin through it,
I would weld and redrill the hole then weld and grind the pin or use another pin or bolt.

 

[accentstencil]

Probably need to fabricate some sort of bush to fit the pin to take up the slack in the hole.

 

[Gazza2005au]

Thank's fella's i was'nt sure if i were missing some plastic bushing's, i'll drill the hole's and make some new pin's on the lathe

 

[Gazza2005au]

Will the air bag's go off if i played around with the chair's?

 

[rambunctious]

Will the air bag's go off if i played around with the chair's?

Disconnect battery before you do anything.
Some say to wait 15 minutes but I never have.
I disconnect both battery terminals then touch the 2 leads together to get rid of any left over charge.
I have pulled the bags out of vz seats and put them into other seats without them going off.
But hey, no guarantees.

 

[Fu Manchu]

As it happens, someone just did a video on this very issue.
Down The Shed with Byron:

 

[accentstencil]

Thank's fella's i was'nt sure if i were missing some plastic bushing's, i'll drill the hole's and make some new pin's on the lathe

There would have been nylon bushes there originally.

 

[Fu Manchu]

3D printing is a solution