VY Commodore Low Beams.

[TITANSVY]

So recently my utes developed the problem of having no low beam lights. The parkers work fine, the high beams work perfectly. Just when the lights are switched to low beams it's got nothing but parkers. I've checked all the globes, fuses, relays, wiring and made sure the headlight connectors were clean and fine. Seems to have happened to a couple others but haven't found a solution so hopefully one of you knows it. Any help would be great cheers.

So if that made no sense, heres the run down on it.
Park lights - just the parkers, working fine.
Low beam - just the parkers, no low beam H4's.
High beam - parkers, low beams and high beams all working.

 

[lowandslow]

Checked the switch?

 

[TITANSVY]

Checked the switch?

Yeah mate, switch is working fine. Strange problem really stumped me so far.

 

[dgp]

If the electrical signal to switch the lights on is not exiting from the BCM, that might be the issue. Just guessing though.

 

[TITANSVY]

If the electrical signal to switch the lights on is not exiting from the BCM, that might be the issue. Just guessing though.

Been thinking it'll be the BCM but was hoping it wouldn't be. Cheers mate I'll look into it.