VY irs into a VT

[glowworm]

[/PHP]











Ok for all you who asked for the pics of the rear end of my car here you are ,hope that helps you ,i got awheel alignment today ,he said to me that he will set it to the specs of a VY .Final Values front LH - total toe +0.4mm individual toe LH +0.2mm RH +0.2mm Camber LH -0053 RH -0014 Rear Axle Total Toe +0.7mm individual toe LH +0.5mm RH +0.2mm Camber LH -0126 RH -0105 so hope that helps ,The car feels totally different best thing i ever did:thumbsup:

 

[greenfoam]

Awesome, one day I'm going to adapt that setup into my VP

 

[yZoH]

That is awesome! Something I spose I'll look into, Was it completely bolt in on the VT?

Curious If I could put that setup into my VQ, I've busted another IRS cradle...

 

[glowworm]

That is awesome! Something I spose I'll look into, Was it completely bolt in on the VT?

Curious If I could put that setup into my VQ, I've busted another IRS cradle...

yes everything bolted up perfectly just had to get a VY tail shaft as mine was different other than that best money i ever spent hehe ..dont bother with putting in cambers just try to get hold of complete irs VX series 2 on to VY and put it in i did mine myself took about 12 hours just taking my time did the lot myself so its not that hard....

 

[yZoH]

yes everything bolted up perfectly just had to get a VY tail shaft as mine was different other than that best money i ever spent hehe ..dont bother with putting in cambers just try to get hold of complete irs VX series 2 on to VY and put it in i did mine myself took about 12 hours just taking my time did the lot myself so its not that hard....

I've done 1 cradle in this VQ, so this will be my 2nd
My last VQ did 3 cradles lol

An my camber is really bad right now, so if I can attempt to adapt this setup it'd be nice!

 

[Dayvo]

I've done 1 cradle in this VQ, so this will be my 2nd
My last VQ did 3 cradles lol

An my camber is really bad right now, so if I can attempt to adapt this setup it'd be nice!

You might have to rework it a bit as the VT / VZ has a wider track than the VQ

 

[nilprapai]

sorry if this been asked but what's the advantage of this set up ?

Cheers

 

[glowworm]

sorry if this been asked but what's the advantage of this set up ?

Cheers

should stop tyres wearing out like they do on a VT as you get to much camber...

 

[Holdens Rule]

Does this involve the whole rear end and how much did it cost?

 

[And_ROOS]

The complete IRS set up is needed, and if you get a VY or VZ you need the tailshaft.

Hmm, if you get a VXs2 IRS set up would you need that tailshaft or could you use yours?