impulsive
Alloytec Racing
- Joined
- Aug 29, 2007
- Messages
- 1,872
- Reaction score
- 20
- Points
- 0
- Age
- 38
- Location
- Brisbane, QLD
- Members Ride
- VZ Alloytec
ITEM:
VY - VZ Dash Plastics (half painted) $100
4 x interior door handle's $25 ea (new)
Custom alloytec stainless steel intake pipe $50
Alloytec Head Gaskets Left and Right $60 (new)
Center Console Aircon VEnts with hazard switch $20
Alloytec Crank angle sensor $50 (new)
FREE - Pickup Only
Alloytec O2 Sensor
2 Drivers Side Ext door handles
Rear Vision Mirror
LOCATION: Queensland, Brassall
CONDITION: Used otherwise stated
DELIVERY/PICK UP INFORMATION: Postage at buyers expense
PAYMENT OPTIONS: COD, Direct Deposit, Funds Transfer accepted
CONTACT DETAILS: PM for enquiries
OTHER INFO:
Manifold & Throttle Body provided a more responsive feel at the pedal, They are both custom built, not by me and cannot be replicated or bought off shelf. The Manifold represents a similiar concept to the CPR6 with an increased volume. The throttle body comes standard at 68mm. Thyis has been custom ported to 72mm. Both these items are a direct replacement part and bolt on. The only difference to standard if you have an SV6 is the butterfly valve at the rear of the manifold needs to ziptied out of the way, much similiar to the CPR6, except this is pre polished and does not rub on the bonnet and looks standard. therefor the engine covers fit.
If you can travel i will happily fit the manifold and tb for you. FREE
PICTURES:
Crank Angle Sensor
Dash Plastics
Door Handles Interior
Head Gasket
Aircon Vents
o2 Sensor
Throttle Body
Manifold
VY - VZ Dash Plastics (half painted) $100
4 x interior door handle's $25 ea (new)
Custom alloytec stainless steel intake pipe $50
Alloytec Head Gaskets Left and Right $60 (new)
Center Console Aircon VEnts with hazard switch $20
Alloytec Crank angle sensor $50 (new)
FREE - Pickup Only
Alloytec O2 Sensor
2 Drivers Side Ext door handles
Rear Vision Mirror
LOCATION: Queensland, Brassall
CONDITION: Used otherwise stated
DELIVERY/PICK UP INFORMATION: Postage at buyers expense
PAYMENT OPTIONS: COD, Direct Deposit, Funds Transfer accepted
CONTACT DETAILS: PM for enquiries
OTHER INFO:
Manifold & Throttle Body provided a more responsive feel at the pedal, They are both custom built, not by me and cannot be replicated or bought off shelf. The Manifold represents a similiar concept to the CPR6 with an increased volume. The throttle body comes standard at 68mm. Thyis has been custom ported to 72mm. Both these items are a direct replacement part and bolt on. The only difference to standard if you have an SV6 is the butterfly valve at the rear of the manifold needs to ziptied out of the way, much similiar to the CPR6, except this is pre polished and does not rub on the bonnet and looks standard. therefor the engine covers fit.
If you can travel i will happily fit the manifold and tb for you. FREE
PICTURES:
Crank Angle Sensor
Dash Plastics
Door Handles Interior
Head Gasket
Aircon Vents
o2 Sensor
Throttle Body
Manifold
Last edited: