Vz ss service vehicle soon

[st3r3otyp3]

It comes pre loaded with thread seal, nothing else to do, x2 on the 27mm deep (long) socket, thats exactly what you need.

 

[kyriacandro]

It comes pre loaded with thread seal, nothing else to do, x2 on the 27mm deep (long) socket, thats exactly what you need.

oh cool so just take out and replace really sounds good

 

[kyriacandro]

27mm deep socket didn't work guys kept slipping any other ideas lol

 

[kyriacandro]

Come on guys lol should i try a 1-1/16 deep socket instead ? The 27mm just kept slipping when trying to get it off

 

[uniacidz]

See this

http://www.ls1.com.au/forum/showthread.php?144522-DIY-Oil-Pressure-Switch-LS1

 

[kyriacandro]

Ive read that im gonna try 1-1/16 as 27mm won't work and a few ppl on that say that's the correct size

 

[bennylava]

I replaced mine last week, although i did use a 27mm with no issues.
I strongly suggest degreasing the immediate area around the switch location as i had a fair bit of gunk built up around it.

 

[AdventraAddict]

Need a thin wall long 27mm socket 100% for sure

 

[kyriacandro]

I used the 1-1/16 deep socket today and it worked as the 27mm kept slipping not sure why lol but did it today all good