Chris E
New Member
- Joined
- Dec 28, 2008
- Messages
- 249
- Reaction score
- 1
- Points
- 0
- Location
- Brisbane
- Members Ride
- Vr Executive 3.8
Start off car is a Vr V6. It's got two turbos on it and I've just got it running, still on blocks but its running. It's running a haltech and it either doesn't have the rev limiter set or its pretty high as I haven't hit it.
Once it hits around 6000rpm the indicators come on for a few seconds. The indicator stalk doesn't engage the indicators anymore though. Everything worked before I took the car off the road, haven't touched the body wiring. Have swapped the engine loom for a manual one though to suit the 5 speed.
Anybody have any idea as to why this is happening? what I should check?
Once it hits around 6000rpm the indicators come on for a few seconds. The indicator stalk doesn't engage the indicators anymore though. Everything worked before I took the car off the road, haven't touched the body wiring. Have swapped the engine loom for a manual one though to suit the 5 speed.
Anybody have any idea as to why this is happening? what I should check?