which spring to bring the back down.

[younglion]

just need to bring the back down so just changing the rear as i think the front is lowered already to even out the ride dont want it ridiculously low just lower than standard, so SL is what i need or will SSL go ok without changing the shocks.??

19' rims

 

[bdv]

What happens if you put weight in the back?

 

[younglion]

it hasnt seen a hard days work in its life. nothing ever goes in there

 

[younglion]

ive heard super lows will drop it 40mm? this would be ideal can anyone confirm this and confirm that you dont need to change shocks as the drop isnt too drastic>?

 

[glenn l]

here is some kings heights for the rear of a ute.

khrl-152sl 380mm
khrl-152ssl 365mm
khrl-152sssl 350mm

all measurements from hub/centre of wheel to guard.

 

[DJ_Cosmic_Fire]

just need to bring the back down so just changing the rear as i think the front is lowered already to even out the ride dont want it ridiculously low just lower than standard, so SL is what i need or will SSL go ok without changing the shocks.??

Your will need to change the shocks & strut inserts to short stop for the SL Kings

Refer to this thread at post #18 http://forums.justcommodores.com.au...-1988-1993/197975-strut-tops.html#post2223860 :- as I posted pics of install & heights etc

 

[younglion]

thanks

i just wana drop the back about an inch and a half. so that would be SL with monroe shocks?

 

[bladerunner]

this is my ute, 20'' rims with ssl' allround,monroe short shocks and the strut top bushes have been replaced with superpro units as the factory ones are absolute garbage

your front end looks lower than mine,they might be sssl on the front. sl' height is basicly fe2 height which is what the front end is std

 

[younglion]

here is some kings heights for the rear of a ute.

khrl-152sl 380mm
khrl-152ssl 365mm
khrl-152sssl 350mm

all measurements from hub/centre of wheel to guard.

ok cool at the moment the front is 360mm from centre to guard and the back is 410mm centre to guard. so id be looking at the SSL to even it out right?

 

[bladerunner]

ok cool at the moment the front is 360mm from centre to guard and the back is 410mm centre to guard. so id be looking at the SSL to even it out right?

Yep that would be about right. Kings springs do vary in height by as much as + or- 10mm. Be sure to get the HD type for ur Ute as they are a different rating to sedans/wagons.