Your thoughts on replacing steering wheel with airbag to a MOMO wheel....

[Shounak]

http://cgi.ebay.com.au/VTVX-Commodo...06690263QQcategoryZ102358QQrdZ1QQcmdZViewItem

That will go straight on..

 

[*VOLATILE*]

Awesome man. Cheers for that. Coincidentally i have color coded my calipers and rotors in red as well. Perfect if i get red steering wheel.

 

[VTSSDUDE]

Is it just a matter or taking the airbag assembley out of the original then into the aftermarket steering wheel?

 

[webwombat]

Does it have to be "Momo"?? as I have seen other steering wheels that fit for the VT-VX without affecting the airbag - these guys do a good job.
http://www.emtechautomotive.com.au/index2.htm

 

[AirStrike]

Is it just a matter or taking the airbag assembley out of the original then into the aftermarket steering wheel?

Momo wheel uses the same sterring coloumn collet, so all you do is take out the airbag fuse and disconnet the battery (I think, its in the Gregory's how to do it), pop the airbag/horn pad off. Then undo the central bolt and slide the wheel off. Then just do everything in reverse.
If you have a VX or high level BCM VT that has the stereo controls you need to swap them over aswell.
If you search for MOMO and my name you will find a pic of mine.
AirStrike :air:

 

[Sparkie]

When you change it over make sure the clock spring(I think thats what its called) The little wheel behind the steering wheel does turn or you dont bump.