TazzI
Envyous Customs
- Joined
- May 24, 2011
- Messages
- 1,095
- Reaction score
- 451
- Points
- 83
- Location
- Western Australia
- Website
- www.envyouscustoms.com
- Members Ride
- Holden VE SS Ute
Gday Phil,Can you show how to read the bcm for a radio code and remote key security code as well as get rid of the air bag and service notice.....I am told that v4 regulation has limits and only the pro can be used to full value such as unlimited defect codes ....I not tried tuner pro or the other software you mentioned I mainly interested in v6 vt ....so if you have some links can you post them here please....ty phil
Really those sort of functions (find BCM key ect) are used only by scantools. Youd need to have a good idea about how to reverse engineer the responses from a scantool to figure out how it does them. But reading/clearing faults can easily be done using EFILive/Tuner Pro, or even OSE tool if you manually read/send frames.
Id suggest try using tuner pro! Just have to pick up an ADX for your VT V6 from pcmhacking.net, then away you go.
Or you can learn to manually read/write farmes using OSE tool but thats relly only for experienced users since it looks like the matrix until you keep at it.
As for the airbag light, fairly certain you can do that in EFILive,tunerpro(with the right knowledge) and OSETool (again have a look over at pcmhacking.net).
Just a warning guys, It you pay anything over $70, your paying too much.looks like $80 on ebay
Ive had a few people tell me that the cable thats $80, doesnt even look like the one in the picture.. which to me.. is pretty dodgy.
Ah there was a cable on ebay for them for $129 or something like that, only heard good things about that one.. pricey but seems to be a sturdy cable.Hey gy=uys, is there anything like this around for VN/VP?
I recently made a cable up to use on a mates VN, although havent had time to test it out yet!