RevNev's latest activity

You just spray them and let the pads remove the overspray whilst braking. Alot of rotors are fully coated in a black paint like...

This is them almost couple years later. No rust really

You can spray the slots and drillings with matte black header paint after a good clean with acetone to stop rusting.

Yes, I think convenience is the reason most suppliers of 4 into 1 headers have the 02 sensors at the collector in the wrong place. We...

Yep - I had to balance the location of my cats with this principle! I haven't actually measured but it's somewhere more than 10cm and...

My ute rolled up on a tilt tray from QLD and my wife came out as they were about to unload it. First thing she said, "Those black wheels...

It's funny that you say that, the last time I phoned them I thought I was talking to myself. .

Nice Ute but I don't like those rims. .

Try it. Your comments on HP Tuners forum made me think that way. On load it read OK but light load and especially idle the engine was...

To correctly sample the entire cylinder bank and not a couple cylinders, the 02 sensors are best fitted at least 6" or 150mm past the...

The DPE exhausts have a good note because the mufflers are packed with long haired fibreglass, but the design from the lousy header...

Also, I hasten to add, the location of the o2 sensor bung in the DPE and pretty much every aftermarket header is terrible. You really...

On direct injected engines, upper engine cleaners are a periodic preventative maintenance item and not a solution to neglected choked up...

I cant see the sprays being a complete clean but i had something on cyl 3 jamming a valve open(tested all other possible issues...

Don’t understand what you are saying. Direct injected engines suffer from carbon build up on the inlet valves due to not having the...