Search results

Age: 25 Donates: Blood, but next appointment is for plasma i believe How many donations (if applicable): 2 so far, booked in for my next already, but ive just moved so will need to re book What organs (if applicable):everything available at the time, even eyes, the rest can go to science as a...

same mate got VCM OTR and cat back exhaust fitted and tuned at 260rwkw.... he jumped me from the rolling start but just kept pulling away.... feel like ive wasted my money on that cam now.... need a race without him jumping (was my fault, i jumped first and slowed as he took off... but he just...

i have an 07 clubby 6.0L auto 260rwkw with VCMOTR 1 3/4 4-1 difillipo extractors and cats, and twin 2.5 difillipo exhaust. after a 220/220 112lsa cam was put in i got 280rwkw but the car felt like it gained 200kw... my car is ALOT quicker than a mates standard 2012 GTS and it drives ALOT better...

just a quick heads up about pedders and and their XA coil overs. I had a small issue with one of my shocks (blew the top seal out) and it was replaced under warranty without question. they also noticed the fronts weren't installed correctly (not fitted by pedders) and they not only noticed...

im 25 and got a clubby for $1K and its the first comprehensive I've had. but i have zero crash history for 8 yrs

price now 7500

too expensive? make an offer that i might like, i am very negotiable

ITEM: 1999 white VS commodore ute auto CONDITION: good REASON FOR SELLING: want a fourby PRICE AND PRICE CONDITIONS: 8000 ono. open to decent offers, need it gone EXTRA INFO: new windscreen new headliner new battery 17 inch mags lowered 1 inch new brake pads and...

ITEM: 1999 white VS commodore ute auto CONDITION: good REASON FOR SELLING: need cash, too many debts PRICE AND PRICE CONDITIONS: 10,500 ono. open to decent offers, need it gone EXTRA INFO: new windscreen new headliner new battery 17 inch mags with 500Kays on tyres...

No, They run an internal sump i believe

ITEM: VN calais minus running gear, everything else is there CONDITION: fair condition, some bits better than other of coarse REASON FOR SELLING: just needed running gear still has rear diff PRICE AND PRICE CONDITIONS: ask and u shall recieve or take the whole lot for 1000...

is the flange on the VN calais V8 LSD solid axle pinion the same as the pinion flange on a 99 commo ute V6???? may aswell change the whole diff over and have the added strength axles than pul it all apart and replace the open spider gears for the clutch pack.

talk to people who actually know stuff about cars and they will say much along the same lines of "a pod will only suck in hot air when not moving" ive been told by 5 different PERFORMANCE shops and so have some of my mates. when you move air is sucked into the engine bay anyway, it only needs to...

will the standard 5 speed manual be able to handle about 250 HP and 580 NM of torque without to much hastle? itll be used in a 4 wheel drive and am a bit concerned about it handling the punishment im going to throw at it. any help appreciated Evan

will the standard fuel pressure regulator on the fuel rail be able to handle the pressure from a 450hp walbro pump?. its comin from a fuel cell so would like the external pump for easy access incase of incidents. just running a single 1/2 inch line. unless someone wants to sell a standard...

acl race series higher compression rebuild kit is around 800-900 new reground cam is 650 flowing the heads and shaving the head face alone is around 500 new valves and springs 300 rocker arms 550 bearing kit between 100 and 500 depending on quality hone and bore again 200-1000 depending on...

as u have a ute, get paceys and run twin cats into twin 2 inch pipes with single muffler on each pipe and then dump DOWN before the rear diff. its fully legal as it is after the rear most opening by more than 330mm. the dumping down will give a good pumping noise too (look at the hotrods that...

quite illegal.... but if u put some new bumpstops in and you get a canary for it just say they were new and that only had the shorter wagon ones when yours were destroyed for some reason and it would take (however long since you got it done) months to get the genuine ute ones. might work..... i...

this is the point i was trying to make. it can be done for 20,000 bucks but it can and ive seen it done effectively for 6k with 250 at the wheels. this engine didnt last long as he was pushing 20 PSI but it was fun when it was there. he then baught a new engine as he blew a rod through the sump...

i might be speaking **** here but i recall hearing something about doing something to the computer on turbo cars to stop them stalling (overfuelling) from the turbo at idle leaking through the bov with no boost where it still creates enough pressure to open the valve. anyone know what im talkin...

sorry i didnt mean to sound harsh but internet makes me sound like a meany... fair enough you want a good setup but, the point i so bluntly and rudely made was that it can be done cheaper. and the exhaust full mandral bent 3 inch dump to tip with a hiflow cat being extra but including a...

blow off valves have a spring inside them which you screw in or out as tension for higher or lower boost. a bypass valve is a fancy name for a blow off valve and is just a plumb back. good luck with it, maybe the valve piston on the bov isnt sealing right if it is set to your boost level. Evan

that price list for for all new gear, done to run higher boost with top quality gear. for one a 400 dollar blow off valve is probly the most expensive street style BOV youll find. 3000 dollar manifold is full mandrel bent 1.7mm stainless tig welded with tuned length headers. i know for a fact...

Diy Turbo Setup DIY your own twin turbo setup that ways its easier to fab up some steam pipe manifolds. a bit of custom intake piping to front mount cooler, its not very hard to plum oil lines from the block through the turbo and then to the sump. get an ecu chip and tune, and dont run more...

i want a commo/buick V6 engine, complete with loom and ECU cheap as possible and in the brisbane area Cheers Evan

1999 commodore series 3 automatic ute haymen reece towball 17 inch rims near new tyres log book history 134xxx kays on the clock car used as work ute (driving to and from jobsites) for the past 8 months and now i want a fourwheel drive as i am working out at kilcoy and woodford and my...

i did a perfect drift with my open centred diff ute on a bone dry boiling hot day going straight through a roundabout. hit it at about 40 and as it changed down a gear (i really hate autos) it slid out perfect, i had full control glided straight back to where i was going and off i drove with a...

it sounds like nearly all vl commodores do, alot of droning just louder and louder as the revs gets higher. i took my rear pip off at the joint. i need to get a new one put on.

its all personal opinion, unless its being used for racing/trackwork then whatever you feel like is going to give the best results. and if turbos are rice then the commodore thing is a whole nother story. if you like a blower then you will be happier with the results they will give. if you like...

a full turbo back mandrel bent 3 inch exhaust with 8 bends (right angle at turbo, right angle at bottom of dump pipe, several more bends through body single high flow muffler) cost $720 fitted to an r33 skyline. twin 2 1/4 will most likely cost more. the three inch may burn out the valves...

petrol tax is nearing 25% now, i earn 310 a week before tax for standard 38 hours (first year apprentice). after tax i get around 270, thats with tax free threshhold and in the lowest bracket etc. my old man pays 48c to the dollar. hes walkin out after tax with half of what he has earned. he...

"dazzling lights" are illegal on a vehicle, which includes all those sexy lookin b&s utes with the load indicators on the side and back are illegal too unless the vehicle is registered as a light commercial. ive looked into it quite a bit over a few months. spot lights arent illegal as long as...

they put them anywhere they can on comp 4wds. any space under the car even, if you can by some means track down an airflow/downforce diagnoses pic, you could try and just place it flat under the car in a spot that would provide adequate airflow... just a thought

mine leaks at the resivoir, because the line isnt clipped properly. sometimes it runs back to the pump. check that

i would like to paint the frame of the instrument panel and the rest of the black plastic stuff on the dash, where is the manual for interiors? would there be something at the library or will i have to buy one? or is it easy that someone could explain to me? Thanx chunder

how could it be illegal to have you light on while driving when people and police (still people but i wonder about some) have them lit so the passenger can use the map, or in newer model cars they use a seperate light for the passenger vanity mirror.

147kw at the flywheel according to the manual. i dont mind that because i have a ute and its plenty of grunt to turn the wheels untill i tow shite.

try the dash fuses, i see it in 4wds alot. in fact happened 3 times last week in some rough stuff.

thanx powerup you have told me the problem ive had both times and you were spot on. first time it was the thermo that wasnt working and with this problem it was the number 6 lead had slightly pulled from the plug clip, so now i got 8.8 splitfire silicon, and when i get a round to it iridium...

ok i filled up with a tank of ultimate on wednesday night, on friday morning i start the car and make my way to work in the cold. the only problem is that it sounds like and feels like the clutch is slipping. the only problem is that the car is auto. it stutters in a way at certain revs aswell...