Search results

Hay mate. Had same issue when replacing my auto. Replaced fuel pump as that's what I thought it was but still wouldn't start. My cousin said to hot wire the fuel pump relay. Do I pulled the relay out and put a wire from side to side in the relay prongs and it started. Pulled the wire and put...

Hay peps. What's the torque settings for the intake manifold and top plenum on a vz v6. Cheers Rocket

Yep. Just pulling it out again.

Mate the f;;cking convert slipped of one spline while I was placing it on the jack and did t see it move. Had it all bolted up and realized when I could turn the converter to bolt it to the flex plate. Rod

G'day mate. When I hot wire the relay, that's when I heard my pump working. It took a little bit to get fuel back up to the injectors. But when it did I let it run for a few minutes then pulled the hot wire and put the relay back and all was good. But I also replaced the fuel pump first as I...

Yeah mate fluid is full 4.8litres. Covertor is in right. The converter slipped off one spline when I had it on the jack moving it into place. Had It bolted up then noticed it so pulled the box back out and slid it on both shafts.

hay folks. Have just done an auto swap. Old one **** the biscuit. Put it all back together Started it up and have no drive thru the box. Has come up check powertrain on the dash. HELP ME. Cheers Rocket

Hi guys. I have a vz crewman v6. I did an auto box swap in it and had the battery disconnected for a couple of weeks. Have put it all back together and went to fire it up battery was a little low on charge so have charged that up. Now the motor turns over but won't fire. If you turn the key on...

Cheers heaps for that benboy.

hay guys. I have a vz crewman quad cam and my auto has crapped itself. Any go to advice on removing the auto box would be great. Cheers Rod

Hay guys