Search results

Update: Changed the oil and got a new balancer and front seal. Still have the ticking though after a few minutes of idle it didn’t seem as bad

Hey everyone So just today I’ve changed the CAS, figured it was the sensor because it’s a new dfi module and still wouldn’t start.. anyway followed a thread on here as to how to change it. Put the new sensor in and she started but now there’s an awful ticking noise. I’m not sure if it’s the...

Hi everyone I’m trying to chase up a new fuel level sensor for my vs commodore ute, having some trouble tracking one down Anyone know where to find one? Cheers

Thanks for the help fellas

Update Turns out the slip on joiner from the pump to the metal hard line inside the tank had deteriated enough so the pump was picking up fuel but spraying it back into the tank Some 5/16 line and two hose clamps fixed it right up Starts up just fine now, bit of noise in the engine bay but...

So with the tank out of the tub I can definitely hear the pump prime, the lines are the right way around. I think in my effort to twist the pump back in it’s come undone from the end of the pump to it’s hose (inside the tank) so it’s pumping fuel but not out of the tank. Do you think that sounds...

After checking all sensors and lines and resetting the ecu, I’ve got error 12- everything is fine I heard somewhere the fuel pump doesn’t give an error code?

Any ideas on how to check the map sensor and vacuum lines?

Update I’ve checked the error codes while waiting for the tow truck and I’ve either got error code 33 or 22 (flashes are a bit misleading) But these error codes are: 33- MAP sensor voltage too high (> 4.00 v). Possible vacuum leak to sensor or faulty sensor. 22: Throttle pos sensor below .2...

Thinking I’ll get it towed back to my shed so I can take it out and work on it properly, stuck in a uni car park atm.

I thought about maybe I’ve swapped the return and fuel line up but I’d still get power to it and hear it wouldn’t i?

Will try and check the relay and for codes tomorrow, will get back to you guys. Cheers

I can’t hear the fuel pump that’s what I’m thinking it is. The dfi and coil packs were cooked and had to be changed (throwing no spark). I unplugged the fuel line from the tank to the filter and turned it over and had nothing. I’m thinking there’s no power to the pump? How do I check for codes?

Hi everyone Ive got a vs series II ute, which up until Friday arvo was running just fine Tried moving my Ute at smoko when it wouldnt start, would crank over fine but wouldn’t start. Was low on fuel so put 5 litres in, still nothing. Thought it mighta been the fuel pump since this has happened...