Search results

It was a faulty sender, problem solved!

Hi Guys, I just had the E3 guages I stalled on my 06 SS, and the oil temp ding working (have to get it activated in tune), but the big problem is the oil pressure. The guage is stuck on full when the ignition is on, and with the tech 2 connected it reads 900 kpa wether the engine is on or off...

Paint it is!

My 4.11 are getting installed today with a trutrac, so my 3.45 will be for sale soon

My bonnet and front air dam are in need of a respray, but I was thinking maybe a wrap for the bonnet and spray for air dam. What are your thoughts on a colour texture etc for the bonnet? I was thinking orange, but really have nfi. Any photoshop kings could have a crack at these pics, that would...

I didn't think the rear had changed at all, but I can't confirm if it has changed at all since 06

Does anyone know if there is a difference between 06 models and newer? I just tried to fit a cf unit based on the g8 and it was to narrow on the inside of the exhaust outlets. I have seen the g8 diffuser fitted on newer models but I'm unsure about my 06. The CF mould was based of the G8 so...

Hi mate I just sent you an email as your inbox is full

Those 6 pistons would look lovely on my VE ! Could you please tell me exactly what drilling requirements is to get these camaro calipers to fit?

Mongrel, I was told they would bolt straight up to the rear with the HSV 350mm rotor

Hey guys unjust purchased year rear callipers expecting them to be the silver CTSV units. What do I have to do to get them to fit? Is it just a matter of trimmed pads and the VE Hsv rotor?

Does anyone know if there is a difference between 06 and models newer? I just tried to fit a cf unit based on the g8 and it was to narrow on the inside of the exhaust outlets.

That sounds nuts

I hv ios6 and Siri jut cuts out after a few seconds. On the holden website it only has compatibility up to iPhone 4!

The cluster brand new was $500, the programming will cost $200 plus postage

Sounds good mate!

Very nice setup mate, well done

I have not sent it yet, although it will be going to Justin at ultimate wiring conversion

I ended up buying a new e3 cluster. There doesn't seem to be anyone in Perth that can do it, so I have to send it to the east coast

Hey guys I still have my VE front callipers, pads and rotors for sale out of my SS-V if anyone is interested $150 for the lot

A guy named Nathan. Yes I do, except I chose not to have satnav.

Has anyone got any reccomendations to change out the Bostons?

Hi guys I had locked in the setup I wanted for my 06 ve SS-v, which was: pioneer gm-d9500f amp, Boston sr60 and Boston sr65's. I got a little side tracked and installed a olden iq system from a SS-v series 2, but yesterday I went looking for the combo I wanted only to find out Boston have...

Jhp sell one for just under $1500 installed. I'm just about to pull mine out, so you can have it for $500 plus postage

I have 288 rwkw with bolt ons only...

Thanks. So far I have been quoted $250

Hi guys Does anyone have contact details for pers that can fit the hsv cluster into a 06 SS? Ie tech 2, EEPROM

Personally, I looked into this upgrade and I came to the conclusion that it was easier to just upgrade the car to a series 2 unit.

Very expensive option

Does anyone have part numbers for the following: piano black elec window control, piano steering control surrounds, piano light switch surround and the silver trim for the steering wheel

Um cheers. Has anyone seen a package deal for the triple guage with trim?

How much have you guys paid for the programming?

Hi guys After doing suspension, brakes, rotors I'm now looking to freshen up the interior, although I don't have a clear picture on what I want to do. The iq system is off the cards is it isn't worth the 2k plus outlay. The ideas I have floating around so far are: 1. Fit some dark coloured suede...

Hi GSL I'm just about to fit the brembos on my ve, what discs and pads are now available? There seems to be new models on the DBA site

thanks guys, has anyone got before and after dyno readouts with those two?

Hey guys, IM picking up a VE SSV this week and I would like to change the CAI to an OTR unit. The car has a custom twin 3" stainless steal exhaust with high flow cats and Pacemaker extractors as well as a cold air intake done by APC (mafless), which runs 272RWKW. Your help would most...

i have 3 prs of oakley goggles up for sale on ebay: http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=7168440906 might be getting some more in at a later date

yeah id agree with that, still unsure of melb at this stage, even adel might be a dark horse

townsville mate

now on ebay: http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=4546380221&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1