Search results

Be very carefull guy's with DBA stuff....the feedback I get is they don't last and are prone to cracking. The cross drilled are really a problem. Cheers Tony

Brakes Another option is to replace your caps with an early type cap possibly. I can sell you a VT upgrade kit but it may not make any difference to the caps at all. This kit is $470 The other option is to convert your VP to a VR / VS front end, the only drama is the top hat needs to be...

Springs Correct guys the legal limit is 100 mm from lowest point except suspension points within 100 mm of tyre. I have springs for all model Commodores from $240 for full set at all levels of lowering. They are King springs. LOW 1 inch down ( 25 mm ) from standard Super low 2 inches (...

Brakes The VT kit is $470 with all you need to do the job. They are much better than any other earlier kit like VS which do not bolt on anyway. They out perform the VP brakes by more than 30%. The master cylinder is a good choice if your smaller than 15/16 otherwise not needed. Takes...

Specs Still under development with the ute at the moment...we have been on and off the dyno 7 or 8 times every time we make a change and go forward with the power. At this point it is still a stock VT 355 roller cam engine. We have fitted 1.73 street Terra roller rockers and a BBK 80 mm...

Be very carefull with your choice of rotors and pads....DBA and PBR are generally not very good due to being to hard to pass OEM spec on life. The OEM rotors are PBR. A slotted slightly softer rotor is the best by far. Allows a bit of give under all conditions (wet/dry) and with the slots...

We have King springs in stock for $220 for the four springs in three different levels of lowering. The first is HSV level of 1 inch lower than standard. Next is super lows that is around two inches lower than standard and still street legal. The third is super super lows around three inches...

done like a dinner What a weekend.......started with a canary on the front screen compliments of our friends at Victoria police FORCE. Well pretend ones looking to harase everyone that had a better car than them. TOO LOW TOOO LOOOOUUD said the gentlemen in the blue suit. Then asked how much...

Master cylinder The 1 inch master is no needed in most cases. 15/16 is more than enough to do the job. What ever car your fitting the upgrade to a 1 inch master is available for. IE: your fitting the kit to a VN you can buy a 1 inch to suit a VN....the VT masters are only to fit the VT...

Hey guy's been working day and night getting the mighty VR out for some skids at the Sandown for the Nats..... on this weekend. The ute is being sponsored by YELLA TERRA with some parts and the entry.....come one and all and have some fun, I will be taking members for a ride if your keen (or...

Correct No point realy doing the rears unless your using at the limit and need more stoping power. There is the VN group a and the VS GTS rears which are 289 mm and 315 mm respectively. Front kits are from $355 and rears around the same. Tony

A Gen3 Throttle Body and the bigger MAF will give you an approx. 20-30kw increase in power for about 1k. We can supply this for you in our shop. This includes all parts needed to fit straight in Tony.

Try wetting the crankangle sensor when it is playing up. If that doesn't help I would replace the TPS. Lastly would be an injector service. Any problems we have all parts in our shop. Tony.

Power Steering Rack Unfortunately you can't just replace the seals. A change over rack is $225-00 plus fitting. Whereabouts are you? If you contact a mechanic he should be able to tell you how much it would cost to put in. Cheers Tony

Cat Back Exhaust/Suspension We can supply the cat back exhaust and also springs and shocks. We have HSV suspension [struts/shocks] and king springs. Email me at [email protected] with your vehicle model and exactly what you require and I will quote. Cheers Tony

I would like to know the implication myself! I don't know where this thred is going or what the purpose was guy's if you have a question or want an answer to some misgivings of where and how my items are obtained then take it up directly with me. Gossip and inuendo will fuel MORE mistrust of...

Way to obvious here!

Stickers are here and ready to send finaly, some are on the way to sunnier places as we speak! There is white , blue and red. The guy doing them made a small blue and the arrangement was altered slightly on advice. They are a bit smaller and all in the same font, but the same other than that...

Have to admit to a spagetti jet, AP5 with the slant 6 I could not brake and the impala 3 speed floor shift I broke every five minutes it seemed. Payed $50 for it and sold him several weeks later for $200 to buy a real car.... HT Holden and the love affair started 1982. Tony.

They will be available this week, so I will take orders for them now and send at end of week. Send a personal message with your address and details and I will follow up with correct details to finalise transaction. This will be the way the parts shop will operate in its basic form. Good test run...

The other picture, still not worked out how to stick two pic's in one attachment.

Here it is boys, let me know what you think. It measures 410 mm x the j is 65 mm high. I stuck the first white one on the uterus, I have blue and red to test with. As I said in the thread elsewhere they will be under $5 delivered. When the shop fires up, free with purchase. The script is as the...

I am having some being made as we speak! Will be $5 each including post and will have in 3 colours, blue, red, white. I will post the pictures when finished early next week. Tony.

I seen the SSx at Sydney car show late last year. It looks good.......good concept.....weak as piss drive train. The fellow I was at the show with, ownes Promac gear and diff centre in Newcaste NSW. He laughed at the transfer case and auto set up. Rubbed his hands together and said he would...

They do make difference if you drive your car with a bit of haste, or jump over the centre isle on round abouts. I have a customers engine out of his HSV VS at the moment that has had the brace since new, I tried it on my ute to see if it cleared the supercharger and found my towers are 10 mm...

We are working on flat rates on a per KG for all of Australia, will be very competative with you local suppliers. Sample a set of Alloys and tyres to QLD will be $60, that's less than fitting and balancing at your local guy. They come fitted and balanced and if they are cheaper than you can get...

Very good point Robbie, we will endevour to give as much choice as possible and room for feedback and product reviews done by members after a product has been fitted or used. A narrow view would be detrimental I believe as well. I am talking with a body kit guy at the moment, will keep you...

Thanks it is the real m'coy, I got him off the accountant at HRT. They used it for the team since 94. It is almost restored back to how they had it, just needs the decal's now. Tony.

Every month the third Tuesday (tomorrow) a car show/cruise is on at Croydon markets eastern suburbs of Melbourne, its undercover and entry is a coupla bucks. Starts at 5 pm till around 9pm. Around 200 cars attend each month of all types. Would be a great place for Vic members to catch up! I will...

These are the FE2 set.

Those above are the VS type... will still fit all models VR to VY. These are the VY struts and shocks. The above have shocks for rear as well. Tony.

I have three choices for you in stock, Is the VR a stocky or IRS? The tree I have is The Monaro FE2 struts and shocks for $195 the lot. The HSV "blu" monroe performance shock as in VS or the latest Vy HSV gas struts and shocks, which are a semi sports ride. The HSV sets are $255...

Three tortoises, Troy, Andy and Wayne, decide to go on a picnic. Troy packs the picnic basket with beer and sandwiches. The trouble is that the picnic site is ten miles away so it takes them ten days to get there. When they get there, Troy unpacks the food and beer. "Ok...

did my time as a bricky, retired from hard labour 6 years ago to full time build components and competition vehicles, now a supplier of online parts. Still build the odd car and around 25 engines a year for boats cars and racing. Tony.

I have easier solution, put new polished ones on. Tony.

Good work but 579 pic's of a cars and only one with TITS, whats the go there? When I went in 91 it would have been 50 / 50 at least! Tony.

I may be able to supply a brand new set. We have heaps of VT / VX / VY HSV interior in most colours starting at $1500. The VY clubby interior is awesome, we have one charcoal at $2400. Some Monaro seats as well. I will have a look tomorrow if there is any series 3 VS ss stuff left. Is you car a...

I will be on, would rather be were ever Charlee is! ......I think? Tony.

I have a getrag 5 speed in my VR ute, when it is cold it is a bitch! I don't know of any performance.... tight tolerence gear box that is not a bit "clunky". The T56 is no different. Tony.

I can do an exchange 3.08 diff for the VP for $350. With new carrier bearings and seals. Ford have a 3.23 diff as well that fit in the Commodores. The VL 3.45 is better for launch but are prone to being a noisy diff ratio. Tony.