Search results

Yeah Mate I'll Try and post them up on here there on my phone. otherwise just text me on 0411386249 and I'll send them to your phone.

Bit of an update, the one powdercoated wheel is sold. This leaves the four matching shadow chrome wheels and tyres with the set of as new centrecaps. Interstate freigth is fine aslong as the buyer works with me in terms of organising. Moving house in a few weeks, so hope to sell them before...

For the spare I would do it for $200, that's the powdercoated rim. If I sold the spare the price for the 4 would be $900 Ono. Brute are you after 4 grange wheels? I'm only looking for a cash sale not a swap for the 20's you have.

ITEM: WH Grange Shadow Chrome 18 inch wheels and tyres x5 WH Grange 18 inch Shadow Chrome Wheels Auction is for 5 wheels and tyres, four of the wheels are painted in shadow chrome, while the spare has just been powdercoated in "florentine silver" Which is the closest shadow chrome...

Oh ok the problem I have is the vz rails have been taken off. So I'm not sure which way to go. It looks like I'm gonna have to swap to vn rails but I don't know how exactly you go about that.

Hey guys I've just installed vz seats into my vn sedan. I followed the how to on here and the back seat was easy. The vz seats I have do not have the vz rails so I can't mod them to fit, so I tried pulling apart the vn and vz seats and swapping the metal Bases as described I'n the how to but it...

Will it really cost more? Buy a decent Vy for 7500, Then gearbox $500 - $1000 Pedal set up: $250 Other bits and peices: mounts ect $500 Which is still ten grand. I'll be doing all the work myself, all except for the re tune of the computer of course.

Hey guys, I'm looking at getting a vy v6 manual sedan. I've been looking and their is very little I'n the way of manuals and when you find one there stuffed and are expensive as. Ive seen some good low k Vy autos for around $7000-$8500. My question is am I not looking hard enough for a...

It has nolathane adjustable strut tops they have been in there like 12 months, they seem visually perfect still however last wheel alignment I did notice that they didn't adjust the top at all! I replaced the wishbone bushes in one side as it was completely flogged out. The front springs and...

Hey guys I'm forever having issues with my wheel alignments and power steering leaks and whines. I have replaced the rack twice now, both times not leaking in donor car and Then leaking in mine. The power steering whines alot sometimes, and looses heaps of fluid lately. It appears to be coming...

Today I had my tailshaft drop out from under the car. 4 of the six Allen Key bolts had come undone and Allen out. I snapped the last one and lost another as I went to take off this morning leaving my rear section from The diff forwards lying on the ground. We got some more bolts and bolted it...

Hey mate nice work on the interior, ive been tossing it up for ages, now im really keen haha. Just wondering what wheels they are? wouldnt mind a set, they look great on ur car!

hey mate could you send me a pm explaining your dash lights. also what sort of costs are involved? is it just an overlay with white leds behind it or??? also your car is looking mint, i think a vq rear boot spoiler would look mint!!!

Hey just wondering if anyone has had any issues with theres? mine started flickering last night, almost appeared they would come back on as i went over bumpers and stuff. checked it all out today and everything is connected properly. The globes are still moving in and out, as in im getting high...

Oh ok awesome as thanks for the help so far, so am i better of going with the vt master and booster or the vn v8 one? did you notice any difference in braking just by changing the master and booster to a vt one?

I've recently discovered I have a leaky master cylinder in my vn v6. I plan to carry out a brake upgrade in a yr or two as I will be dropping a 304 in, so I was considering the vt twin piston upgrade. Money is tight right now, and my rotors and pads are basically new, so I was thinking rather...

interested in selling the hard drive, some games and a controller seperate??

oh ok i have heard a little about poly fill before, where can you get it from and how much is it? if i build it to say 3ft cubed for example will the port size you mentioned above still be right? is 33 hz fine, and i use 6 inch pvc for my ports is that what the above one is desinged for...

would my best bet be to build the box to the biggest area i want to take up, which i think i worked out to be around 3 cubic ft, that way im not going down as much in size? so im not loosing as much of the low stuff? is there anything i can do to the smaller box to regain that lower stuff?

Oh and I've got a sheet of 18mm so I'll use that and double up the baffle.

I've actually got a box built already that is considerbly larger than the one you just designed and it works really well HVCP helped design it with me. It works really well but it's huge And I know that I need to sacrifice looks and space for bass but currently I can't get my spare tyre out! So...

ok so the box has a reccomended size of: Ported: 51ltrs (1.8 cu. ft.) 33hz tuning so the box should be 51 ltrs, plus the area of the magnets, plus 2 or 3 litres, plus the area of the port? Im going to make up a couple of ports, this shouldnt matter greatly? Aldo just just so i...

The subs a Mach 5 IXL 12, it didnt come with anything stating the size, i contacted them and had no luck, they basically said to google methods on testing for the area, as they do not have that information available.

hey mate have you still got ur exectutive seats???

Hey just wondering whats the best way to determine the displacement or area taken up by your subs and ports? just designing a new box and wondering how people work out there numbers. Thanks :)

how much for the seats as a whole? front and rear together? any rips or holes???

Heres the pic of the motor and gearbox i spoke to you about ob the phone. These were taken just before it was stored, and its been stored a few months. The only difference to these photos are i cleaned it all up a bit.

what happen with the wheels?

im in morwell, got a vn motor 160,000 with auto, a few of the bolt ons are missing but there easily accesable and cheaply. Came out of a wagon, was in running condtion no issues, Ill do it $175, thats the motor and the auto, I also have a shed full of vn parts so i could chuck it a few freebies...

yeah headunit has three pre outs, its a Clarion CZ509A. Brought it new just under a yr ago. Im running to sets of splits, so yes four speakers. rcas are ran down opposite side to power cables.

Hey everyone ive recently installed a four channel response amp to my stero, 4x100 wrms at 4 ohm. now when i have the rcas plugged in just channels one and two ie front speakers i get no interfernece. If i remove these two rcas and plug them into rca inputs for channels 3 and 4 i also get...

could you post up some pics mate? i am looking at doing this :)

sorry mate didnt get no pm? $275???

Ill give you $275???

Bump open to offers

bump??????

Recently something has broken in my heater system. Now when i go from fan speed one to two ect there is a quiet clunk in the dash, coming from the heater area. Im guessing its some kind of fan relay? because when i do so there is a shortage of power, ie lvl 3 cluster lcds dim for s aplit second...

Thanks for your help guys, Im pulling the box out wednesday morning, so ill check it all out. whats a good price to pay on a clutch kit theres a fair few on ebay from $200-$300. Also if i find it is the thrust bearing and that the pressure plate and clutch plate still have plently of life is...

Hey evryone i have a VN v6 T5 and it has developed a rattle when you let off the accelerator. i have started a thread and oposted a video, im just after as many opinions as possible to what it could be. The noise goes away when accelerating. heres the link, the video is in post 12, 3/4 way...

anyone????