Search results

I have a mate with a manual vr ss and when ever he starts it and takes it for a drive it stalls when it starts to warm up just before it stalls the engine gets a slight tick and the only way to restart the car is to let it cool down???? What could cause this issue

Thanks so it looks like ill be steeling some off my vt parts car lol

Hey guys i have a slight problem i have l67 injectors in my supercharged vp and it started to get a slight idle problem and a vac leak and i found it to be 2 injectors i pulled them out to find 2 of the injector oring retainers had fallen out with the orings still hanging in There i was...

Did u install ya raptor kit yet?

Hey all i have just brought a raptor supercharger kit and i have been reading about needing to block off the pcv why is that? I know i have to take off the manifold vent line that joins to the tb and bung up the tb side and put a filter on the manifold side but i dont have a clue on howto block...

Im stuck i cant get the center bearing off and its pissing me off how do i get it off? Iv try'd everything Im upto the stage of fulling the bearing off the shaft and fitting the new one

Good stuff mate

Im already getting my heads done

Ill buy your rockers off you if you decide to go with just a cam :)

Thats no good but family dose come first. How did your tune go after all did it make much of a difference

I spoke to my local performance shop about fitting a interceptor piggy back to my vp v6 to tune for nitrous and during that talk he told me to get some 2.15 roller rockers from the net but i cant seem to find them all i can see is the mace or yt roller rockers and theu are in 1.9:1 ration. I...

Is she still alive? Im interested on how far you went with the sv3800 tune

Good idea mate but the heat will still be there try some plexiglass

Hey guys you maybe able to help me ever since i put a manual in my vp ive had dramas its grinding going into 2nd if your not firm but will go in if you get it right and 3rd makes a loud shutter and grinding noise in gear but when you take ya foot off the clutch its fine but that only happens 1...

Yep and 2.05l and use mineral ATF DEX lll and a bottle of penrite lubrizol

Where did you get your rocker covers from??

Howdy all i have just done a service on my manual and i filled it upto the top filler plug and now its crunching every now and then in 2nd so i asked a few local people and they seem to think i may have over fulled it so i look in the gregorys manual and it says its ment to take 2.05l and i put...

Hey just a quick question are series 1 and series 2 heads the same if not wats the differnce

Dorey93 did u get your gear

Hows it go

It will be getting loged with gas for the tune and i was thinking 50 shot so retard the timing 2 degres at 50 shot And i think its unloading in 3rd :)

Hey just a quick question how much nos can a buick v6 handle i have been told by a bloke here that he tried his vn on a 75 shot and killed 3 motors in 2 months and he said to run 50 insted? Has anyone run nos on there v6 and if so what shot?

I already own the cam and chip tune

Also lol is there some way u can tell me what size the spacer is behind the cam gear that comes with the stage 3 crow cam my mate told me there was one but its not there now (in the box)

Ok thanks also what else would i need and to run the cam and is there a way i can put the cam in without taking the heads off cause the head gaskets arnt that old and i dont want to waste them lol and yeh its a cheap fun car so im not going to worrie about a timing chain. Also can u tell me what...

Also get into contact with nigel (the1) is his user name he dose awsome power tunes at great rates

Well it looks like charters towers dragstrip is the only place to race as townsville dragway is now closed for good so ill be seing this thing in action soon enough your drag strip needs to hold meets more reg i think

Hey steve im putting a stage 3 crow cam i got off a mate into my vp was just wondering if i need to run a double row timing chain or can i use the stock one? Also can you tell me were i can get the washer that sits between the cam gear and the cam to space the gear off the cam? Thanks buddy...

Would love to see a build thread on it :)

Would love to see a build thread on it :)

THats a vn dash cluster? Looks tops very good starting point

That sux cause there isnt anyone here id even trust to put a shift kit in lol what do you want done to it

Hey man you have a shop in charters that builds autos tuff ones sounds ok its called dunright auto his name is mick

I didnt know there was a dyno in charters towers lol hey did u by any chance make up blueprints for the manifolds? Id be keen to buy a set from A1

Were did u get tge kit from?

Awsome Man ill be watching this one

Have a chat to steve from mace buddy

Charters local ill be seing you this year at ya 8mile drags :)

Can you get a postage quote for the vn bonnit to 4814 qld

I Want the worked heads and matching manifold if they will work on a stock series 2?? How far will it drop my comp under standard 9.1 i want to run more comp? can ya take them off for me when you get a chance buddy and did you find the twin throttle setup