Hi all. I took out my power window switch to convert to LED. Snipped out the green leds from factory. Now i'm not sure on the polarity of the posts to soldier in the new LEDs.
I have 2 questions:
1. What is the polarity of the posts? Can someone use my image and draw some on for me...
G'day people. I've had a look in the manual and fuse box and I can't seem to locate where the fuse is for the central locking which controls the reciever for the doors opening via the remote. Can anyone tell me where I could locate this.
Cheers.
Wondering if anybody has any idea where I can buy some cloth trim like the VX Berlina has.
The trim looks the same as the seat pattern shown below.
Reason I ask is that I need to re-trim headrests and I need to get some of the same material..
Any ideas?
Hello people. I've been on this forum for years but I can't seem to find my ride page. Anyway this is my Gen3 Berlina Wagon.
The following is the specs of my ride ---
Car Type : Holden Commodore
Model : VX Series 2 Berlina Wagon
Engine : 5.7L Gen3 V8
Colour: Storm Grey
Engine Mods...
VIC - 18" ROH Fury wheels with near new Tyres
I have for sale a set of 4 X 18" ROH Fury shadow chrome wheels with near new tyres. Rims have got some marks on them and a little rash but is not hugely noticeable and can be fixed or sprayed easily. Can provide photos for non-tyre kickers...
I am looking for some VZ Driving lights to fit Monaro front end. There are 4 lights in total (2 driving lights and 2 parkers). If anybody can help me out please msg me. Cheers.
I'm looking to buy a set of VZ Monaro Driving lights. I am after the lights only, not the plastic shroud that they attach on.
I'm also after the upper and lower grilles for the front bar.
PM me if you can help. Cheers.
I purchased a set of Gel coater fibreglass engine covers and I was wanting some info on what to do next. They are gel coated on the top but the bottom is still straight fibreglass.. What would be the best thing to spray the bottom in before painting to cover the fibreglass? Will I need to coat...
Hi people. I'm in the process of doing a VX to VZ Monaro front end changeover and I was wondering if anybody knows what size the driving lights are that clip into the small plastic shrouds on either side. Are there aftermarket lights that will fit these shrouds that I could sue to save on buying...
Can anybody tell me how to get to the bolts that hold on the spoiler on the wagon at the top of the rear window or if anyone's got any diagrams on where the bolts are. Thanks
Just wondering if the romours are true that the wagon models have been stripped from the VE lineup? Would be such a shame if they have gotten rid of them for the 4WD style cross X style.
Also anybody got any pics of the utes?
I need suggestions of good places that I can get a good price on fitting of a Reece or similar towbar. I only need a standard light weight tow bar. I would like to get somebody who can come out to fit it for me or if it's nearby Knox area I could drop in to get it fitted. Can't seem to find many...
I have for sale a 7" LCD screen with IR remote. Comes with all the wiring required for the install. No scratches as you can see (might need a wipe down with a LCD wipe) and working perfectly. No dead pixels etc. Comes with 1 RCA input.
How much: $100
Where: Pickup from Wantirna, VIC
email ...
VX Series 2 GEN3 Wagon Cat Back. Taken off professionally for aftermarket one. No rust holes or breaks in the exhaust. Working perfectly.
How much: $20 bucks.. Thats it.. It even has a chrome tip on it. The condition is you must pick it up from Wantirna, VIC
email me at ...
Hi there.. I bought a HSV front bumper for my berlina.. it's got the foggies on it.. What I would like to know is can you piggyback them onto the same relay as the headlights so they come on when you turn the headlights eliminating need for a secondary switch or will this overload the circuit?
I have a V8 Series 2 wagon. Recently told by mechanic that the inside edges of my wheels have been scrubbing badly.. I know this is a problem with people who lower or put big rims on commys. I got 18" rims and only dropped 1" all round.
Can anyone suggest a good camber correction kit to suit...
I got a problem.. well I think its a problem.. I dont often run my aircon full blast but the othert day I hat it up full and after say 7 seconds it turned itself off for about 2 seconds then back on again.. and did this constantly. Anybody know whay this would occur? Only seems to happen when on...
This has been driving me nutso.. I'm not engineer so I'm not entirely sure where Holden wrapped these wires in that crappy sticky black tape stuff but if anybody could assist would appreciate it.
I am trying to locate the yellow wire that normally would run from the steering wheel controls...
Hey people. Just wondering if any Melbourne people in here know of anywhere out East that fits Ferodo Formula TS2000 brake pads at a reasonable price.. Also looking to get some Exhaust work done at the same time. If anyone can suggest a place I could get both done at the same time please let me...
I have a full Timing light setup for sale. Hardly ever used. Not used by myself but by my father and has been garaged since new.
Will post Australia-wide at buyers expense. If shipping will require payment prior to send. I can tell you the cost of shipping before payment or pickup from...
For sale. Standard Springs from a VX series 2 Wagon. Springs professionally removed to make way for aftermarket ones.
$30
Pickup from Wantirna, VIC only please.
If you want to buy these please email: [email protected]
Thanks.
For sale. Standard Gen3 Cat back system. Came off a VX Series 2 Gen3 V8 Wagon. No rust. The pic only shows its a little dirty. Comes with chrome wide mouth tip and everything included in the pic.
Price: $50
Pickup from Wantirna, Melb only.
If you want to buy this please email...
This is a guide I put together to help those with earlier model Commodores (VT - VX) install a later model VY Holden strut brace. This is a standard part worth about $40 from Holden so this may be a cheaper alternative to other brands if your looking at installing one.
Sorry the URL for this...
Just wanting to know the ins and outs of MAF pipes for LS1. There's many out there to buy that i've seen. HSV and other aftermarket ones for the LS1. There's polished chrome ones and carbon fibre and plastic.. What would be the best way to go for a LS1 with a MAF attached? Anyone know of any...
Hey there people. Just thought my sotry might help you. I was having issues with my fiel gague. It would claim that I had like 1/4 fuel left and then the car ran out of fuel.. Ran dry. It was reporting all kinds of weird fuel readings. I took it into holden and they claim that it needed a...
I have for sale a set of Stock springs from a 2002 Series 2 VX Wagon. These springs were professionally removed for sports springs. Springs are in as new condition (except for a little bit of dust :) )
MAKE ME AN OFFER.
I am located in Melbourne and local pickup only for this item due to...
I purchased some Nankang brand tyres for my new 18" rims. I had never heared of them before. I can't find much as far as a review but all I know is they are made in TW. Anyone had a set? Bad/Good Experiences? I've had Falken's before which I loved but wore out way too fast. I've been told these...
I have for sale a set of Stock springs from a 2002 Series 2 VX Wagon. These springs were removed for sports springs.
I would like $80 for em ono.
I am located in Melbourne and local pickup only for this item due to size.
Any questions msg me.
Picture Below.
For sale. VX Berlina Series 2 Alloy Wheels.
All rims are in very good condition. No gutter scrapes/scratches/tarnishment.. Come with Bridgestone Turanza BR30 225 tyres as supplied stock with the VX Berlina. The front tyres are about 6 mths old and the backs are about 7 months. All tyres are...
Just wondering if anyone else has had similar problems. I've heared that this effects the late model VX and VY's. I was driving home and it said I had 200km or so left and my engine died. i rolled it into a servo to find the fuel tank was empty. I was like whaaa? So I thought ok i filled up and...
Probably a stupid question but would you be able to fit VX SS FE2 suspension to a wagon? The fronts are apparently same rating but the rears may be different. Can anyone tell me if this is possible or not. Thanks.
Hi folks.. I picked up a cheap exhaust and was wondering it will fit my car. I have a series 2 wagon and this exhaust is off a VT Calais. I think the wheelbase is longer but I am not sure if it will fit. If anyone could help me I would appreciate it.