Search results

all good I worked it out bad earth to the ecu the tune I did was good

is there I wire diagrasm for vs bcm to vr loom ? I have fitted a vs l67 v6 motor and ecu and motor loom in to my vr but no injectors help please somme one

the key was but the vr bcm is still in there but the key has stoped working thee locks ?? and I have turned of the anti theft module off in the chip HELP do I have to work out how to in stall a vs bcm and key in to the r loom ?? or is there some one I can pay to do a tune that will work ?? vs...

hi I have just fitted a vs v6 supergarged motor and vs ecu and vs motor loom in to my vr and the fule pump works theres spark and motor turns over when I turn the key but no injector pulse please help

I have spat it lol and cut the vn up and sold it has scrap . and got a vr now to stick the l67 In it vs motor harness and ecu In to a vr berlina will it work ?? with malf 31 theft deterrent signal missing /set

how do you over come not having a air flow sensor

o ok I well leave it on its 6min run and ok I tryed but still no starter motor or injectors but the fuel pump is working this time so im going to have to go over it all and see y theres power at the injectors and starter but no go lol is it cos theres no water in the motor ? I only wish to...

ok cool I did has you said brett_jjj and one did the burn and I compeared it and looked good and the spear just did not wish to verify after the burn so that can go back in the the uv eraser for 3more times on full and thank you for your help so fare jxw and brett_jjj

yep that's set but when I reread the chip it was not right had a heep of FF in spots when I compeared it to the burn that was ment for it so I have cleared it but know the burn will not finish im gessing the chip is dead ? so im going to have to get a new one grrr ? 27c010 or my gq-4x is not...

I will reburn the medcel and I don't have the bcm/keyfob it this the right settings in the medsel ? malf 31 theft deterrent signal missing /set malf 72 auto trans speed sensor no signal /set eng light malf 73- pressure control solenoid / not set eng light malf 72 - auto trans speed sensor...

[/URL][/IMG] sorry if this is not right [/URL][/IMG] the next one might be out a bit ??? but any help will be sweet [/URL][/IMG]

hi all is there a gide out there for the Vs into vn conversion I have a vs motor loom and ecu and a supercharged v6 in my vn Calais but I cant work out were I have messed up the dash lights u the fuel pump clicks but no don't run . if I jump the relay the pump works the starter motor will not...

http://www.facebook.com/#!/photo.php?fbid=3606691336270&set=a.1100932653869.16179.1543278443&type=1&theater ya its fixed it was a broken solder joint in the key

hay when your car is running is the fan going to ? cos i stuck a vn hsv tuned chip in my vr and my engine light stays on the speedo wont work and wont rev ether so im asking is the chip for a vn ?

ok i have worked it out it was the immobiliser and some one ran an earth to the starter relay i cut that and left the key on for 45 mins ant the car started on the original ecu & chip now any one know how to kill the immobiliser / bypass it ?

m i tryed another ecu and an original chip and it still no good im going to have to go back over it thinking a bad wire on gear box ?? cos y will it start ezy on a vn chip but not a vr ???

hi i changed the starter motor to day in my vr and now it starts but now i have a oringe light with ! and the code is 12 . i tryed 3 times to get the the same code 12 grrr and the car wont start but it i unplug the ecu then plug it back in it will start then if i leave it turned off for 10mins...

hi you might have fixed this by now but you might have a wire rib to the boddy just be hind the heater box ?

hi i had the same problem and in the end the it was a blocked air line . try to blow your air lines clear but make shure you have the air line unpluged on both ends to save braking things then blow the lines clean with a air compresser in my case it was it the heater tap metal air pipe...

ok i got the same problem a new pump / spark plugs / new coilpack / new map senser / new filter's looked for leaks and cant find any im a bit lost on wot to try next but it will start then stop 5 times or so then runs fine and i have even tryed the relays and ecu and still no luck

ok m i dont mind i got a spear motor and i will send them to you next week and thank you so much now i can go get a cam and some flat top pistons and so on

ok i did the burn and tested it in the spear vn and it worked ya and has it got a rev lmit ? cos it went past 7 on the tack o and has it got a speed limiter ? and thank you for your help i will send you my old memcals when i now were to send them

ok no probs man if you can sent me a mp or email wive your address i will send them to you for free thank you for your help and i dont mind i can get more medcells lol so i wont miss the 2 vn and 1 vs one and i will ee how i go

ok sorry if this seems silly but do you mean this one {Arbp 5D.bin} and can i just burn it to the chip or do i need to stack it ? and i cant remember wot page i got that file from but i got that one an 3 athers and i will wate till i now if i have to stack it and that i have got the right one...

ok i will give that a go and i reinstall the origanal chip back in and that works good but when i install the burnt one no good m ok i will do the test just in cace and and is there a better tune that you now of for a s1vn v6 ? and or wots the best program to make or chang the chip eg protuner ...

hi all i got a gq-4x usb programmer and 2 blank 27c256 chips and i did a burn today it seems to work but wheve the burnt chip in the fans stay on the holl time and the eng check light stay on so i must of ****ed up? my car is a s1v6 calais i am new to this and i tryed greenfoam's...