Search results

Water pump in my vz clubby ls2 has just gone and just wondering what has to come off the engine to replace the waterpump just not sure,some guy at hsv said they have have replaced a few waterpumps in vz ls2 6l's best price i got on the waterpump was $335 for waterpump plus gaskets $12 plus 5...

try savage-fibreglass.com got some nice bonnets.i love to get the vented red monaro bonnet on my clubby.

Try these guys,when i get the money i going to get one for the clubby. monaro bonnet vz commodore monaro style bonnet to suit vz commodore sedan,ute or wagon Fibreglass monaro style bonnet with smooth show quality finish on the inside. Uses all original factory mounting points for a hassle...

Talk to phonsy at GM Motorsport,has to be one of the best in melbourne. I will be taking my Clubbie there for a mafless tune and get otrcai when funds allow,and then the power bug begins.:thumbsup:

Here ya go try NVU pretty good service i have had with them. PART NO. P-17 Genuine VY-VZ HBD Leather covered auto shifters with satin chrome highlights . Assorted colours please ring for more information TEL: (+61) 03 9466 RRP: $132.00

Cheers mate

Best economy i got on a long drive from Melbourne to Traralgon and back was 9.5l100kms' but with 50 percent around town and 50 highway shes around 13.5/100kms'.

So who is goin tonight to the off-street drags at Calder should be a few cars running goood weather and should see some good times and a few runs.:driving:

Thanks mate,gonna go for the VZ Calais lights soon any idea how much they would be worth $.Later this year probably get a VZ Monaro fibreglass bonnet the one with the nostrils from Savage.:thumbsup:

Just wondering guys if i can fit either VZ Calais tailights or the VZ SS tail lights on my Clubbie as i want a different look as everyone says' from the back it looks like a VY Clubbie,true same lights,i thought about tinting them but dont think it would be legal. So i want a diifferent look...

It has probably been to Walkinshaw Performance for the Tomcat exhaust upgrade and that little round badge i think is the Walkinshaw Performance logo they put on customers' cars.

Maybe this is what your mate seen,from the dragway wheels website.

I dont know why you took the hsv badges of it,i wouldn't taken the hsv badges off my vz clubby for the chev badges,anyway hardlid looks sweet and in the newyear going down to difillipo exhausts' and get twin 3 inch s/steel cat-back at the moment i got the dual 2.5 remus cat-back and bmc flat...

I think this is what your after. PART NO. SPZ CUSTOM CUP HOLDER TO SUIT VY-VZ MODELS. NVU is proud to offer a limited quantity of genuine VY-VZ Climate control facias with cup holders to suit non climate control vehicles. This comes with two cup holders and vents.For more information please...

Just got rid of the sv6 and got a STING RED VZ CLUBSPORT LS2 all i can say is should have done it ages ago anyway i purchased on of these lower airbox sections from NVU for $40 and i had it on the sv6 with a BMC hi-flow panel filter and it freed the revs' up and roared allright.I took the parts...

Highendrev give this mob a try i got the HSV lower airbox from them good people to deal with http://www.nvu.com.au/products_show.php?page=6&cat=2

G'day Kilmo havent been on for a while. Here ya go a new system out from HM Headers they e-mailed this reply back to me a while a go. We have designed a header for the Alloytec motor which we will be producing very soon, it is a HM112SS which is a (stainless steel header) which will bolt up to...

Yep Interceptor works with factory ecu,but they reckon all the hickups sorted anyway browzing through HARROP website and found interesting read there. Harrop VE Commodore Product Range Harrop Engineering is currently finalising our next range of VE Commodore enhancements which will begin to...

Bloke as they said to me and as i have stated they have it sorted,hey i got an idea give them a ring yourself and they will tell the same.:whistling :thumbsup:

Gave them a ring 2 weeks ago CAPA that is and they have sorted all issues with the using the Haltec Interceptor,they said cost is $5OOO.:thumbsup:

Nice ride mate love the XU6'S,mate you go to put the wing back on asap or it just looks like a mock up. There are some rotten mongrel drivers' out there in shopping centre carparks,i know 3 weeks after buying my phantom black vz sv6 came back out from shopping me and the missus noticed a dirty...

I have to agree with highendrev,this colour looks like a shocker just like that pinky/purple xr6 colour ford had.

How ya goin Vzsv6 been a while since ya been on,what other mods'have you done to you car lately. I think you said when you fitted your dual 2.5" you gained mid -top end power and lost low down power is this true. I spoke to C.A.P.A. recently about their Blower setup for the SV6s' and what...

The only thing stopping me from getting the Powerchip tune was that VTSS350 mentioned VCM are bringing out an Alloytec edit,mate have to keep us up to speed on this one. Here is more info. http://www.powerchipgroup.com/datasheets/1/Hol0151.pdf

Howz The Car Going Vz Rob

yep they sure do.

Well for starters they are s/steel:thumbsup: . Some guys have put on there SV6s' dual 2 1/5"and gained a lot of power up top and lost torque down low because of this.Thats all good for the strip but on the street were do you need the power most for everyday driving. We all know there is only...

Only thing i like about VE is steering and handling awesome,interior nice,back of SSV nice,6l engine grouse,but seriously should expect a lot more from all the time and testing on the billion dollar baby. Just dont like that front bar on the SSV at all. I think recall is (ONLY) 1300...

Try Rare Spares.:thumbsup:

How is it going highendrev,HM Headers do the HSV Exhaust sytems for them,and they are in Hallam a suburb over here in Melbourne. The HM Headers dual 2 1/8” exhaust system i enquired about the price and $900 fitted,comes as stainless steel with stainless steel tips of coarse. Also Rob is right...

Here ya go a new system out from HM Headers they sent this reply back to me. We have designed a header for the Alloytec motor which we will be producing very soon, it is a HM112SS which is a stainless steel header which will bolt up to your existing catalytic convertors or into our hi-flow cats...

Check out the HSV Intake thread in here.:thumbsup:

yep and there is Brock Fairlanes' as well.:bang:

Wow sounds like the utes' a beast mate,good on the freeway and she picks up alot quicker,thats' the way it should of come in the fist place from the Holden factory in the first place. Rob at the moment trying to get the funds saved for the DIFILIPPO 2.25 EXHAUST with maybe Pacemakers and...

You were right didn't take long at all for a tune to happen. Your Holden Commodore (VE 3.6 V6 Alloytec195) contains the latest technology ECU that can be re-programmed through the on-board diagnostic port (OBD-II). Specialised software interfaces with your vehicle’s engine management system...

Powerchip tunes the ECU to deliver extra performance without relying on knock sensor feedback. “In terms of fuelling, the standard tune is pretty rich – it runs about 10.7 or 10.8:1 [air-fuel ratio] . they adjust it to around 12.5:1. That’s where the engine likes to be – going leaner doesn’t...

Yep give Powerchip a ring they can increase the rev limiter,even though maximum torque is well before hand,and many other things they can do,have a look at the Powerchip Alloytec tune thread.

WTG Rob first person to get the tune,i'm going to get the 98gold tune on the sv6 after christmas,going to get a Diffilipo dual 2.25 cat back fitted before it gets done. Did it take them long to do your ute rob,much more power down low,need more feedback?:thumbsup:

It is what a lot of people with the hfv6's have been waiting for a very long time for a breakthrough of some kind.I deffinetly going to get this tune on my sv6 at Powerchip if not by Christmas it will be early in the new year.Going to get ect adjusted for sure.

wtg fill us all in on the results,when its' all good.:thumbsup: