m80

hey guys, i just need some help as i am stuck on what i need to do. so ive brought m80 3.73 gears and a mini spool. i have an m80 LSD here that im going to pull apart and use the housing of (as i know you cant mini spool the lsd centre). what center do i use? is there any commodore that came...

More fun during my diff rebuild. I got the bearing and seal kit from Mace and while most was fine, the pinion nut was deformed. Looked like it had been squished in a vice or something, and couldn't be threaded all the way. I got in contact, sent a few photos showing that one side was 1mm...

I've just bought a 3.7:1 Motive Gear set to put in my VT Series 2 with M80 diff. However the new pinion has an extra length after the shaft which I imagine would hit the tailshaft flange. I've checked the old gear ratio and the numbers stamped on each gear and it's definitely an M80. Bearing...

Just trying to work out if my diff is on its way out or if the clunking I’ve been getting is something else. Here’s a video of me rotating the tail shaft by hand with car on ramps, in neutral. https://streamable.com/8zp0bl Does this seem a bit much? Both shafts rotated the same amount ie not...

ITEM: I have an M80 out of a VY series II SS, 3.91 ratio with a Kaaz 2-way LSD (Model Number: DAG3810). Diff is tight, just needs new oil and friction modifier and its good to go. Comes with Manual and the 2 ABS sensors. This will fit any holden with a LS1 or Ecotec, will not fit any LS2...

Hi guys I have a vz and a while ago I upgraded to a new diff. Now these blokes did not mention to me whether it was an m78 they were giving to me or m80 that was a fully rebuilt lsd diff. Now I got a truetrac which I want to get installed but am not sure if mine is an m80 I've done a...