20" WHEELS RUBBING ON DRIVERS SIDE STRUT

[Zdiia]

title says it all, it's rubbing on the strut piece where the end of the spring rests, where it sticks out a little bit, doesn't rub on the other side as the bottom bits are in different places, seems too be normal. just knowing what i can do too fix this? tyres are 245/30/20.
fitted on my friends car fine and he has the same model, mines just lower, but i don't see what height has too do with this as it's the strut itself...
here is a comparison of both sides, you can clearly see the effected side.. (ignore the metal that's from a previous set of wheels)

 

[Jxfwsf]

Get a wheel alignment and make sure they adjust the camber as far as it'll go.
That should move the tyre away from the strut unless something is bent.

 

[robbhibb]

have checked your wheel bearings running big rims and tyres wears them out quicker

 

[vc commodore]

As JXFWSF mentioned a camber adjustment would probably solve the rubbing issue....Best to have about 1/4 degree negative camber, which will move the rim away from the strut, good for tyre life and still handle properly

 

[Immortality]

Thread cleaned.