20x8.5 and 20x10

[jasons sv6]

Hey all.
I am looking at getting a set of wheels however they are 20x10 on the rear and i have sssl's will they scrub? and also how much am i going to be looking at for tyres on the back?
thanks guys.

 

[Gambel]

You will be cutting it very close even with guards rolled and the right offset.
My mate has an ssv ute with 22x9 all around with rolled guards and +45 offset and you can't fit a finger between tyre and guard.

 

[BottleFedVS]

Standard fittment on HSV 20" is 8" on the front & 9.5" on the rear set.
So I'm guessing there must be some!

 

[RUF-60L]

Standard fittment on HSV 20" is 8" on the front & 9.5" on the rear set.
So I'm guessing there must be some!

HSVs don't have SSSLs on them though

 

[wake jake]

I had GTS' on my ute with 9.5 rears with SSSLs no hassles even when loaded up

 

[jasons sv6]

Thanks for the reply guys.
How much am i looking at rolling the guards?

 

[astroham]

Hey all.
I am looking at getting a set of wheels however they are 20x10 on the rear and i have sssl's will they scrub? and also how much am i going to be looking at for tyres on the back?
thanks guys.

yes yes and yes ... i have the same set up 20 x 10's rear and sssl's ... scrubs like a bitch ... i have rolled my guards changed the camber ... there is nothing to be donw ... it will either scrub inside or out depending on the offset

 

[sv6 power]

20x10's look very nice!!! I got 20x10's rear with pedder sl springs and offset is great. Don't think its as low as sssl but i have to roll the guards too cause there is like a finger gap and i can feel the scraping... I think it costs around $100 to roll the guards, correct me if im wrong.

 

[jasons sv6]

$100 isnt too bad, or is that per guard? even still not bad.
Thanks for the input, I just bought some wheels off ebay super excited to put them on.

 

[SV666]

What rims did you end up getting?