22" Wheels 22x10 rear

[SSVUTE05]

Hi Guys,

I Just joined up because I bought a 09 SSV Ute. Now the first thing I need to do is put an exhaust on which thanks to this forum ive learned a lot! I also need some wheels and springs. Can anybody help me out!

Can I fit 20x8.5 on the front and 20x10 on the rear or even 20x10.5 on the rear??? I do wish to lower it, not much, just enough to suit the new wheels.

If I decide to go with 22s, can I fit 22x10 on the rear or even 22x9 all around???

And also what offset would get me to the edge of the guards? would 40+ be ok or 35+?....

Thanks Guys look forward to hearing back from you all :beer chug:

 

[Troy711]

Personally I hate the look of bigger at the rear than the front, it makes it look like a Matchbox car.

 

[NIXONLS1]

20x8.5 front 20x10 rear will look hot. Don't go 22s, they affect performance and don't look as tuff as staggered 20s.

 

[troykinsvt]

RUBBER BAND WHEEL WOOT WOOT i mean ouch chiro anyone

 

[SSVUTE05]

But can you go 22s staggered?

and would 20x10.5 be too large? or could you run something like a 30 offset? or will that stick out too much...

 

[Zeussy]

Oh, the "Anti - Big Rim" committee are here...

It wasn't that long ago every was ragging on 20" wheels, now they're being recommended - now 22" rims "are the Devil.." LOLfail...

The way I read it, I think the O/P was asking if the full set of 20"s would fit with a 10" rear rim, or if he decided to go 22"s (all round) would a 10" rear rim fit under there no problems. Not so much the 20" on the front 22" rear combination.

 

[SSVUTE05]

Yeah! so 20x8.5 front and 20x10 rear... or 22x8.5 front and 22x10 rear..... would these fit? has anyone on here done this before? and what offset? I just dont want to spend the money buying cast wheels from a tyre shop made to suit ALL cars with 5x120 with a 45 offsett or something....

 

[Troy711]

I thought you were asking about 20 front and 22 rear. My bad. I should t bag out staggered fitment, after all I have 20x8 front and 20x9.5 rears.

 

[cheesy_j]

I have 22x10 on the rear and mine is lowered about 40mm and the main issue is having your guards rolled so u don't chew out your tyres

 

[adr8]

Just read a thread on LS1 forum someone got a defect for rolled guards. Check it out I couldn't be bothered reading the whole thread, (4pages).