m1lky
New Member
Youll be suprised at what size wire you can get into small terminals. Even if you thin it down a bitbits still better than a thin wire the whole way.
Set the gains at half otherwise your amps likely to go into protect. Set low pass at 80hz and turn bass boost off, Run each sub off a bridged channel. Make sure the subs are in phase, particularly if they share a cavity,
Check your rcas aren't loose and that your ground is tight and on bare metal
Set the gains at half otherwise your amps likely to go into protect. Set low pass at 80hz and turn bass boost off, Run each sub off a bridged channel. Make sure the subs are in phase, particularly if they share a cavity,
Check your rcas aren't loose and that your ground is tight and on bare metal