Accelerator cable vh 202 with Holley 350

[dags061]

Gday All. Just installed a Holley 350 on to a 202 and the cable is too short as it is connected to the side of the carby instead of the back. Any help would be appreciated. Thanks.

 

[soop]

Buy a V8 cable.

 

[Baphomet]

also youll need to frankenstein the bracket you got or make a new one to fit the holley's side mechanism.

 

[soop]

Varajet bracket will work.

 

[MY_84_VK]

Or you can buy one from redline, they make the bracket for the 350 Holley.

 

[dags061]

Thanks all. Managed to get everything from the wreckers. Used the original bracket. Just had to twist the end. Thanks again.

 

[Vkwagoon]

Heya I’ve got the same issue, which cable did you end up using. Just a 308 one ?

 

[vc commodore]

Heya I’ve got the same issue, which cable did you end up using. Just a 308 one ?

V8 one works

 

[SSFUNKEL]

I just turned round the Original Braket , and Used a V8 Cable. But i had to sit and file the Pivot ball down as it would not fit on the Cable! Hope u got deep pockets as you can now watch your fuel gauge go down with every press of the pedal! Lol.

 

[vc commodore]

I just turned round the Original Braket , and Used a V8 Cable. But i had to sit and file the Pivot ball down as it would not fit on the Cable! Hope u got deep pockets as you can now watch your fuel gauge go down with every press of the pedal! Lol.

So you were using the wrong pivot ball

350 holleys don't suck fuel if you have them set right.....

Mild 3.3, 350 holley....450K to the tank with a VC