Accesory control gone

[suppy]

Hi all,
Put a nokia CK-7w car kit in over the weekend, and now the stereo wont turn off when i open the drivers door. Tried disconnecting the car kit to see if it would make any difference but its still the same. Tried doing a master reset on the stereo as well as checking the options for door accessory control and still no go. The only thing i didn't try was disconnecting the battery.
Its like the stereo has got a mind of its own - it wont turn on/off with the ignition switch either
Anyone got any ideas?

 

[commodore2004]

Hi all,
Put a nokia CK-7w car kit in over the weekend, and now the stereo wont turn off when i open the drivers door. Tried disconnecting the car kit to see if it would make any difference but its still the same. Tried doing a master reset on the stereo as well as checking the options for door accessory control and still no go. The only thing i didn't try was disconnecting the battery.
Its like the stereo has got a mind of its own - it wont turn on/off with the ignition switch either
Anyone got any ideas?

Make sure you havn't wired the memory wire to the main power supply of the radio.

 

[suppy]

Wired it up using the phone connector under the dash - still does it even if i disconnect the phone connector.
I have checked that and it seems to be correct - strange thing tho, when i use a test light on the connector in the car i get a connection on memory wire, but if i turn the ignition to accessory i don't get a connection on the accessory wire....

 

[azzss]

It's not the door switch itself is it?. I have a mate who has a vy and often he has to flick the door switch before the stereo would go off. Just a question where did you mount the phone cradle? i also have a CK-7W kit and a manual but haven't put it in yet because wherever i put it its in the way of 1st gear or the pop out cup holders. Cheers

 

[suppy]

Found the problem - blown fuse! i blew the radio one when i put the car kit in and replaced it ( 15 amp) but there is also a 7.5 amp fuse that blew. Replaced that and bingo, good as gold

azzss - i use the bluetooth connection rather than the cradle, and just sit the phone in the console.Next job is to wire up the holden phone buttons. anyone done this ?

 

[azzss]

Thanks mate, i was thinking of just buying a bluetooth phone be alot less heartache i reckon. Do a serach on the holden buttons install because i have seen it covered on a crewman (dunno if it was a vy or vz but should be the same). Cheers.

 

[zforum69]

Next job is to wire up the holden phone buttons. anyone done this ?

This is the thread that tells you how to do it: http://forums.justcommodores.com.au/showthread.php?t=13131

Z

 

[suppy]

This is the thread that tells you how to do it: http://forums.justcommodores.com.au/showthread.php?t=13131

Z

That thread only shows how to connect the main unit to the stereo input.This thread on the LS1GTo forum shows how to wire up the Nokia CK-7W to work with the Holden phone button

http://www.ls1gto.com/forums/showthread.php?t=67942&highlight=ck-7w