Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

aftermarket tacho problems

badass77impala

New Member
Joined
Sep 18, 2008
Messages
20
Reaction score
0
Points
0
Members Ride
vp executive
i cant get the tacho to respond with the tach sender wire to the brown wire hanging on the passenger side and nothing i even pulled the plug off of the coil pack and made sure the wire has good conductivity but the tacho sits on zero. i wish it was old school and just hook it up to the ground on the coil lol
 

krawczuk

New Member
Joined
Feb 25, 2004
Messages
92
Reaction score
0
Points
0
i cant get the tacho to respond with the tach sender wire to the brown wire hanging on the passenger side and nothing i even pulled the plug off of the coil pack and made sure the wire has good conductivity but the tacho sits on zero. i wish it was old school and just hook it up to the ground on the coil lol


hi, you got all the power wires and ground wires conectred up properly , and is the tacho set up right , some have a switch or wire to cut ..
mark k
 

badass77impala

New Member
Joined
Sep 18, 2008
Messages
20
Reaction score
0
Points
0
Members Ride
vp executive
all the wires are hooked up properly. im thinking the signal from the module isnt strong enough or the tach to pick up properly
 
Top