Air Cleaner

[Goon]

You might be thinking of a 202. 2 lines go to the filter, rest to the manifold and carby.

 

[bigg_vin]

yeah, a 202 has two lines going to the filter.....

i hope i can block em.....

 

[Goon]

Try using screws mate, ive got one of my air cleaner hose with a screw in it, ive just taken my filter off to many times to connect it up everytime.

 

[bigg_vin]

i just wanted to make sure i could use a screw in all the vac lines..... or do i leave some open?

cheers

 

[bigg_vin]

blocking up all the vac lines is going to mean the "settings" of the carby are going to be on "max" arent they?

 

[Goon]

Its hard to say without a diagram or something to look at such as a picture on where they go, i wouldtn suggest blocking lines that the car uses to operate such as "eg vaccum advance like a blue motor"

 

[bigg_vin]

vac advance is from the dizzy to the carby though yeah?

im just talking about blocking vac lines to the air filter.....

 

[Goon]

Yeah mate from the dizzy to the carby, with my ride the 2 air filter hose are one from the aircleaner atthe nose going to the air cleaner, the other from the manifold valve to the air cleaner "thats the one i have blocked" My six has a green and red valve on the manifold with hoses going to the carby and egr etc, i wouldnt suggest blocking those.

 

[bigg_vin]

i wont block any that i dont have to.... hahaha

just mainly curious about the vac lines going to a small canister on the drivers side of the engine on the air filter housing.... i think the way the vac line is going is: from carb, to canister, taking reading from inside filter hosing, back to carb.... can i just join these two hoses?

thanks again

 

[Goon]

That cansiter sounds like your polution gear/emissions has charcoal or coal in it.