Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

Am I missing something?

Discussion in 'VT - VX Holden Commodore (1997 - 2002)' started by Irukanji, Feb 17, 2012.

  1. Irukanji

    Irukanji 101% Lunacy

    Messages:
    111
    Likes Received:
    3
    Trophy Points:
    18
    Joined:
    Jan 27, 2012
    Location:
    Heathcote
    Members Ride:
    2000 VT Exec LS1 A4
    Sup,

    Anyway, I was looking to do some of the bushes in the front end because I feel like it and they would probably benefit from some TLC anyway...

    So I was googling for "Control Arm bushes", front ones, an I see the kit and it's only got 6 bits of rubber? They don't look long enough to go all the way through...

    (like so http://www.nolathane.com.au/part_images_new/45318.jpg )

    Or am I over estimating the thickness of the part, and/or only 1 sided push in bush?

    Cheers.

    Sorry for the stupid question, but figured I'd ask before I have to make 2 trips.

    EDIT: Or is it only the big end?(but then that would be 2 on each side, being 4, leaving 2 left over?) Bit confused...
     
  2. Sabbath'

    Sabbath' Redblock Jesus

    Messages:
    6,050
    Likes Received:
    890
    Trophy Points:
    113
    Joined:
    Jul 3, 2006
    Location:
    Vic
    Members Ride:
    80 Series// MK5 GTi//
    My guess is that the smaller ones are a split bush. Half goes in each side.
     
  3. Boonz

    Boonz Donating Member

    Messages:
    4,042
    Likes Received:
    44
    Trophy Points:
    0
    Joined:
    Jul 27, 2005
    Location:
    berri, south australia
    Members Ride:
    green 355 VG ute
    There is 2 different size bushes to choose from for the inner bush. So yesyou will have 2 left over

    Sent from my MB860 using Tapatalk
     

Share This Page