another diff question

[rob drag racer]

im pulling my diff center out of my old vp race car and dumping it in the vn s1 im putting on the strip (its all ready mini spooled) which shims are best used the ones out of the vp that are from the original center or the ones in the vns1 that the center is going into

 

[centy]

mate just swap the spool out of the middle.
otherwise you will have to workout which if any of the shims you have will work.
you have to change the crown wheel anyway.

 

[rob drag racer]

i thought the crown was the same ?

 

[Immortality]

definitly swap the minispool into the VN center. changing the center from the VP into the VN will throw things out. the centers were mass produced. in an ideal world everything would bolt up perfect, however things aren't. thats why the shims are used to set the final adjustment

gearsets are also machined as sets (crown wheel and pinion) and these should always be kept together also

 

[rob drag racer]

thanks for the lowdown it sucks but i spose i will have to to the other center