Another vn v6 turbo project thread...

[Claudy]

Tyson, are ya running the BOV that came with the kit? Xadous hes getting it dynoed today! Cant wait to see power figures :yeah:

 

[tysons_2001]

yeah im running the same one that come with the kit.

 

[Xadous]

shall be interesting to see what power is made

 

[HIROLLA]

Howd you go with the dyno mate?

 

[tysons_2001]

Didnt end up getting a run, they monitored the a/f and it was leaning out way too much at about 5psi. I'm removing the stock reg today and seeing if that helps.

 

[vt1538]

Why dont you give Doctor Bob or Greenfoam a yell & get them to do a two bar tune for you. Once you have something set up properly for the injectors etc that you have all the problems should disappear.

 

[stocky]

Why dont you give Doctor Bob or Greenfoam a yell & get them to do a two bar tune for you. Once you have something set up properly for the injectors etc that you have all the problems should disappear.

hes gonna need the 2 bar map sensor before he gets the tune though. i just got one for $110

 

[Xadous]

I thought you had a tune made up for it already?
ahh well keep us posted bud

 

[vt1538]

Thats right stocky. I just find it strange how a lot of these turbo mods are done on a stock tune with the old 1 bar sensor. It cant be good for the engine at all.

 

[tysons_2001]

I've got a 2 bar map sensor and me and greenfoam had a go at the 2 bar tune but couldnt get it to run cause its hard to 2 bar a vr tune.
I've fitted my transcooler today and i've removed the stock fuel reg and getting a fitting put in for the malpassi as we speak. The stock reg didnt flow enough fuel for my 600hp fuel pump and wouldnt let the pressure below 50psi even with the malpassi removed. The malpassi was backed off so much it let the fuel flow straight through, with the stock reg removed i will be able to get the idle pressure set to 3 bar and it will rise on boost.
Should solve my leaning out problem.
Should have it all bolted up and running in an hour.