304 Anyone got info on these Rockers

[VrWagz1]

I been doing some shopping around for some new rockers for my heads on my vr. It seems these particular ones turn up alot in my searches and they all appear to be the same. They are seemingly cheapish but they seem ok for a standard motor. Anyone got any feedback on these. They are for a all but stock motor that is having some porting done on the heads and a small cam put in, just wanna put some basic roller rockers back in instead of the non-roller stock ones, so im not lookin at spending squillions on a set of rockers.


http://www.atracingworld.com/index.php?target=products&product_id=30272

COMP Cams: Aluminum Roller

HOLDEN V8 253 304 308 355 BOLT ON VN ROLLER ROCKER KIT - eBay V8, Performance Parts, Car Parts, Accessories, Cars, Bikes, Boats. (end time 01-Sep-09 17:18:44 AEST)

 

[AirStrike]

Procomp/Sydney Speed Supplies/AT Racing = All the same made in china crap!
Stick with known brands; Yella Terra, Crane, Harland Sharp (believe they have ones to suit the Aussie 5.0lt now), C.O.M.E Racing, etc

 

[H1GHROLLR]

pro comp build really really terible stuff stay well clear as air strike said stiwith known brands its cheaper in the long run i would proberly go with yella terra or harland sharp there awsome rollers

 

[TappetHead]

yep......Rickshaw rockers those.

What about the bolt on street terra's for a near stocker?

Try YT direct or TTT Performance Engineering

 

[VrWagz1]

thanks, i hand an incling all this stuff was procomp rubbish. TappetHead i pm'd you a few days ago about some yella terra prices.

Thanks for the input everyone. I'll steer clear of those ones then

 

[VrWagz1]

can someone please explain the "difference between stud mount adjustable" and "bolt on adjustable". From what i can guess, stub mount adjust uses shims or somthing under the mount point of the rocker to take up any lash, and bolton adjust has a tapped out hole with a bolt and lock nut that goes through it to screw in and out directly ontop of the valve to take up any lash.
If thats all it is it hardly seems worth paying an extra $170 for???

I am looking at the street terra ST2010(stud adjust) and ST2033(bolt on adjust)

 

[AirStrike]

Get the bolt on adjustables (prob don't even need the adjustables to be honest). The stud mount require the heads removed and studs installed.

 

[VrWagz1]

thanks airstrike

 

[ari666]

yeah shaft type street terra's are awesome. i gots' me a set o' em and they is teh shizz

(street talk, get it?)