Are vp to vs irs drive shafts are the same?

[Clutchy]

Andrew he is talking about changing rear arms what has that got to do with the tail shaft he is talking about the half shafts drive shafts what ever you want to call them that go from the diff to the hub.


To the op your best bet would to be either try it or ring a place that sells them see if they have a different part number.

 

[ephect]

Call Holden to confirm

I would guess no they are different sizes, only because the vp IRS is 10mm shorter than vr-vs, so one would assume the trailling arms are also 10mm shorter.

This may not be the case as the hubs may account for this difference between the vp and vr-vs models.

Sorry for the confusion.

 

[Redline16]

Thanks guys I measured mine up and its roughly 46.5cm so just need to measure a VR VS one up

 

[Redline16]

For future reference, VP VQ VR VS irs drive shafts (runs from both sides of diff to rear wheel hubs) are all the same length.
Changed trailing arms in my VP last night to VS ones

 

[vp_exec]

I fitted up VS rear arm and brake setup on my VP IRS some time ago in order to get a reasonable range of wheels to choose from. I swapped everything from hubs, to brakes to push each side out further.

 

[pjdm1980]

Are the rear VS calippers the same as VP?
And is there a Left and right half shaft or are they interchangeable?
Cheers Pat

 

[Clutchy]

The drive shafts are the same there is just a diff end and a hub end but it don't matter what side you put them on.

 

[pjdm1980]

Cool thanks mate.