Autometer dash conversion.

[w1r3d]

I have the gauges already, i am just playing around with different types of led warning lights and will trap with carbon fiber vinyl once all wholes are cut.

 

[w1r3d]

 

[w1r3d]

Still not sure on some of the wiring any help would be greatly appreciated

 

[markovr]

 

[w1r3d]

Thanks markovr

I know I am not reinventing the light bulb, someone must have done the swap in the past??

Any help with the indicator lamps is greatly appreciated
For some of the indicator lamps like oil, check engine and fuel empty I might have to frankenstein the factory circuits

I will keep posting updates
currently I am working on the wire harness and the mount for the new cluster.

 

[w1r3d]

All wired up

 

[w1r3d]

 

[w1r3d]

Park#

Connector 1 wire 6

Park Brake ON continuity, Park Brake OFF, Open Circuit

Engine

Connector 1 wire 7
Not sure of the trigger for this one?

Oil

Connector 1 wire 8

Engine OFF continuity, Engine Running Open Circuit

Brake

Connector 1 wire 9

Resistance/ continuity ??

L/H Turn

Connector 1 wire 12

Alternating between 5 and 8 volts

R/H Turn

Connector 2 wire 12

Alternating between 5 and 8 volts

High Beam

Connector 3 wire 2

B+ at all times

Connector 3 wire 4

Head lamp OFF or ON and Low beam B+

High Beam approx 1.0 volt

Instrument illumination power source

Connector 2 wire 4

0 volts headlamps OFF, 12 volt head lamps or park lamps ON

 

[TI3VOM]

Looks awesome mate, good work.

 

[w1r3d]

Anyone got ardunio experience? I am thinking a micro processor could control the LEDs via a 8 port 12 volt relay board.