BEEP BEEP BEEP - Bulb sensor keeps going off

[anonymousmoose]

Try and reset both brake switches and see how that goes.

How do I reset brake switches?

 

[-Junior-]

How do I reset brake switches?

Lower the fuse cover and look between the fuse panel and steering column and you should be able to see them. There is two of them, then what you need to do is push the pedal down then push both the switches in. This will push the switches towards the pedal and once done, let the pedal go and you should hear a few clicks as the switches realign to where they are ment to be.

If you can not get to the switches from the front, you will need to remove the lower trim and come up from the bottom.

Hope that helps.

Junior

 

[anonymousmoose]

Ok guys, I've been sitting on it for a while.

I check the brake lights a few more times and all 3 worked. Then I was driving a few days ago and I get a phone call. My dad was in the car behind me and said the left brake was not working. So when I got home I check again and all three lit up.

Well I decided to replace the left bulb anyways yesterday and so far no more beep.