Bit of a drama please help

[51cvq]

Ok i have bought a set of turbo manifolds for my gen 3 turbo conversion. The motor is in, and i started to install the manifolds but i have a power steering pully i think in the way. can some one tell me if i can relocate it, if they have relocated it was it a big job and do you have pics. I have attached pics to show you what im talking about.

Thanks for the help.

 

[adamc11]

Maybe you have to remove it to fit the manifold but can put it back after? You would be best asking on the LS1 forums, more turboed cars over there.

 

[Baldric]

undo the four or so bolts on front of the snail and you can twist it around so the pipe clears the pulley

 

[HRT 666]

What model car did the turbo kit come from? Does it suit the car your trying to fit too?

 

[Baldric]

its just the snail is facing the wrong way down he justs needs to do what i told him above

 

[walesy]

under driven power steering pulley?

 

[H1GHROLLR]

with the 25% under drive kit do you replace the power steering pump with a small pulley

 

[walesy]

no its just the harmonic balancer that you replace... im not even sure if putting a smaller pwr steer pulley would put too much stress on the pump or anything...

EDIT: oh and the belts of course

 

[H1GHROLLR]

yeah but some of the the 25% kits you get now come with new bearing pulleys