commomad
New Member
- Joined
- Oct 14, 2007
- Messages
- 91
- Reaction score
- 1
- Points
- 0
- Location
- Sunny Coast
- Members Ride
- vr berlina
This thread will in honour of the might BUICK V6 first i plan to try an make it go as quick as possible down the 1/4 mile with out rebuilding engine internals. All motors that with be used in this trail will be donated or from a local wreckers. So far it has run a best of 14.21seconds at 161.1km/hr at willobank race way.Non intercooled
With a standard motor i hope to run a 13.5 before a engine build. All mods will be performed at home in the garage. accept for auto build.
MODS
Powerdyne super chager kit from CAPA 9 psi at 5800rpm
Fully built 4L60E no stall.
3.7 diff gears with spool
Exhaust- Pacemaker comp headers
into mandrel bent 2.25 pipes into
single 3inch high flow cat
into mandrel bent 3inch system
Intake- From blower 2.5 alloy cooler pipes into
3inch FMIC into 2.75 pipes into
Custom reverse intake manifold.
I purchased this manifold off E-bay seller "fejuly"
it consist of a standard S2 intake maifold with the top chopped off, then the top of an ecotec plenem that as been trimmed and squared up and fully welded inside.
It uses a Standard ecotec T/B and a Standard VS throttle cable.
If you contact this seller he would probably make you one to order.
With a standard motor i hope to run a 13.5 before a engine build. All mods will be performed at home in the garage. accept for auto build.
MODS
Powerdyne super chager kit from CAPA 9 psi at 5800rpm
Fully built 4L60E no stall.
3.7 diff gears with spool
Exhaust- Pacemaker comp headers
into mandrel bent 2.25 pipes into
single 3inch high flow cat
into mandrel bent 3inch system
Intake- From blower 2.5 alloy cooler pipes into
3inch FMIC into 2.75 pipes into
Custom reverse intake manifold.
I purchased this manifold off E-bay seller "fejuly"
it consist of a standard S2 intake maifold with the top chopped off, then the top of an ecotec plenem that as been trimmed and squared up and fully welded inside.
It uses a Standard ecotec T/B and a Standard VS throttle cable.
If you contact this seller he would probably make you one to order.
Attachments
-
08102009203.jpg59.8 KB · Views: 205
-
08102009204.jpg55.8 KB · Views: 192
-
10102009214.jpg46.2 KB · Views: 178
-
29092009189.jpg87.4 KB · Views: 156
-
23102009230.jpg59.8 KB · Views: 149
-
04012010464.jpg99.6 KB · Views: 161
-
18122009433.jpg129.6 KB · Views: 196
-
18122009436.jpg110.7 KB · Views: 188
-
04012010462.jpg113.8 KB · Views: 218
Last edited: