ruso
New Member
- Joined
- Apr 15, 2006
- Messages
- 149
- Reaction score
- 1
- Points
- 0
- Members Ride
- VX Acclaim S2
Hey I'm in the middle of a boot install. I got a 4ch Kicker Amp and a Kicker Monoblock. I bought a 1 farad Stinger cap, and I'm abit iffy bout the installation. I've read all the other posts already but not too certain.
I've got 4g wire from the battery to a fuse then to my cap in the boot. From their i've got 4g wire going off the cap to a distr. block and to my 2 amps. All earths are seperate.
When I charge the cap should I remove the fuse near the battery?
And once its charged how do i go about connecting it to the amps? (Should I disconnect the negative on the battery, to prevent any shorts. And then install the positive from the battery and the 12V going to the amp back on the cap. Follwed by putting the negative terminal back on the battery?
I've got 4g wire from the battery to a fuse then to my cap in the boot. From their i've got 4g wire going off the cap to a distr. block and to my 2 amps. All earths are seperate.
When I charge the cap should I remove the fuse near the battery?
And once its charged how do i go about connecting it to the amps? (Should I disconnect the negative on the battery, to prevent any shorts. And then install the positive from the battery and the 12V going to the amp back on the cap. Follwed by putting the negative terminal back on the battery?