Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
There advertised 320 but i measured them and they were 330mmx32mm. Measure the ones you have?
Hi mate,4. Can i get the QFM police spec pads for the SSZ calipers? If not, should i go for Bendix ultimate pads?
Also, for those that are serious, we also stock QFM's A1RM pads (sits roughly between EBC Red and Yellow in terms of performance), which is what we use in the rally car, and they're still fine for the road when cold. $110 for those. Just be aware that these are a semi-race pad, so brake dust and slightly higher than normal rotor wear is to be expected. And I do mean slightly higher rotor wear, with a friction co-ef of 0.48 its only slightly above a road pad, and plenty of Skyline guys run the A1RM as a daily pad and never have complained about rotor wear.
I'm picking them up tonight i think so i will check then. Where did you get your rotors, what type are they? I did some calling around and DBA are in short supply now, will be a few weeks before they get some more.
Place 1 quoted me:
EBC x drilled and dimpled FRONT PAIR: $565
RDA slotted FRONT PAIR: $477
EBC red stuff pads FRONT PAIR: $300
EBC red stuff pads REAR PAIR: $230
Place 2 quoted me:
RDA slotted FRONT PAIR: $171
EBC red stuff pads FRONT PAIR: $191
EBC red stuff pads REAR PAIR: $152.9
Was also quoted for DBA slotted FRONT PAIR: $330
Not sure if place 2 has quoted me incorrectly or if place 1 is ripping me off...