H1GHROLLR
CHEMICALLY SUPERCHARGED
- Joined
- Feb 18, 2009
- Messages
- 744
- Reaction score
- 2
- Points
- 0
- Location
- ROCKINGHAM,PERTH
- Members Ride
- VX CLUBSPORT R8 LS1
they look better with the map pockets taken off and few black plugs in the holes
Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.
ive noticed in a matter of time if u use em for melways or have kids and baby seats at the back they will be screwd again, this is holdens fault for not making em more sturdy they are very flimsy esp for the melways which is a heavy book they should have made em more stronger!
they are called MAP POCKETS.
they are about $50 each and come with everything you need to replace them.
they are screwed on from the inside too.
remove the HIGHEST twist knob on the side of the chair (not the bottom twist knob) and then lift the plastic (that is under the twisty knob that you just removed) over the metal bar that the knob came from.
now, grab the bottom middle of the plastic seat back and pull it towards you.
you will hear a snap and then you will have the plastic seat back in your hands.
the snap you heard are 2 white plastic clips that hold the backing to the seat.
dont worry as there is no way to remove the backing without breaking them - plus, these 2 clips are included in your new map pockets!.
remove the old map pocket and replace with the new one.
when returning the backing to the chair, make sure you have the top 2 hooks in properly, then push the base inwards, lift the side over the metal bar and replace your twist knob.
job done.
5 minutes each side.
the snap you heard are 2 white plastic clips that hold the backing to the seat.
dont worry as there is no way to remove the backing without breaking them - plus, these 2 clips are included in your new map pockets!.
Great description, still useful in 2023. Cheers.they are called MAP POCKETS.
they are about $50 each and come with everything you need to replace them.
they are screwed on from the inside too.
remove the HIGHEST twist knob on the side of the chair (not the bottom twist knob) and then lift the plastic (that is under the twisty knob that you just removed) over the metal bar that the knob came from.
now, grab the bottom middle of the plastic seat back and pull it towards you.
you will hear a snap and then you will have the plastic seat back in your hands.
the snap you heard are 2 white plastic clips that hold the backing to the seat.
dont worry as there is no way to remove the backing without breaking them - plus, these 2 clips are included in your new map pockets!.
remove the old map pocket and replace with the new one.
when returning the backing to the chair, make sure you have the top 2 hooks in properly, then push the base inwards, lift the side over the metal bar and replace your twist knob.
job done.
5 minutes each side.