4bait
Member
- Joined
- Sep 24, 2005
- Messages
- 48
- Reaction score
- 0
- Points
- 6
- Age
- 59
- Location
- Cheltenham Vic
- Members Ride
- VR
Hi guys
Putting a VS V6 motor into a boat
anyone know if you can Bypass the anti theft for starting. looking at the flow charts the BCM supplys a 5 volt current to the ECM to say it can start the motor, but that just sounds too easy.
have already started getting the engine ready and the watercooled manifolds etc are nearly finished but want to get everything else organised before starting the transplant so as to minimise the down time etc.
Have the same engine in a Hilux but the ECM was modified to suit it hoping to do this one without The ECM mods if possible and dont really want to wire in a BCM and use a holden key in a boat. (after all it doesn't need central locking either LOL) and for reliability out on the water it needs to be as basic as possible.
Cheers Andy
Putting a VS V6 motor into a boat
anyone know if you can Bypass the anti theft for starting. looking at the flow charts the BCM supplys a 5 volt current to the ECM to say it can start the motor, but that just sounds too easy.
have already started getting the engine ready and the watercooled manifolds etc are nearly finished but want to get everything else organised before starting the transplant so as to minimise the down time etc.
Have the same engine in a Hilux but the ECM was modified to suit it hoping to do this one without The ECM mods if possible and dont really want to wire in a BCM and use a holden key in a boat. (after all it doesn't need central locking either LOL) and for reliability out on the water it needs to be as basic as possible.
Cheers Andy