can ayone give me dimensions of the vcm otrcai?!

[VXSS]

need the dimensions if anyone can help

 

[Nut Kracker]

Just measured mine.
Diameter of neck....100mm (approx. 4 inch)
From neck (where it joins to the T/B) to the front (of air filter)....280mm
Total width @ air filter (horizontal).....465mm
Total depth @ air filter (vertically).....90mm
Depth of OTR just behind the air filter......35mm
Depth of OTR just in front of the neck......60mm

 

[VXSS]

legend, btw was it worth getting?

 

[Nut Kracker]

Ohhhhhh Yeah. It's more rugged than the plastic crap. IMO is able to draw a lot more air and comes up a treat after a good polish.
You may have seen this pic before.

 

[Nut Kracker]

By the way. To change/wash the filter, all you need to do is un do the 4 screws on top of the OTR,
remove the cover and lift out the filter. Easy Peasy.
You don't really have to take the whole OTR out. Well I don't have to.

 

[VXSS]

what kind of manifold is that?

 

[VXSS]

looks good btw

 

[Nut Kracker]

Thanks mate.
It's a high rise, high flow manifold with a twin 60 mm T/B. All custom made by Scott @ Chip Control in Sunbury.

 

[VXSS]

pm how much it cost mate im interested, did you have to add supporting mods

 

[Nut Kracker]

pm how much it cost mate im interested, did you have to add supporting mods

Check your in box mate.
You won't get much benefit out of the manifold without the other mods. It all goes together and works as one.