can i use cable ties on my exhaust????

[v6lux]

Guys, you gotta realise that there is movement in the exhaust pipe, so I suggest finding an old pair of Jocks that the elastic is still good in them, This will work a treat!

Just be sure to have the skid marks on the inside!

 

[padrickz88]

ahhhh yes! ghetto fixes, love it. ok so here we go. what you do:
get an old over mitt, electric blanket or any kind of fabric that resists heat
a coke can or two
a dozen cable ties.
beer


now, wrap the heat resistant fabric around the pipe, then cut up the coke cans and wrap the alloy around the fabric. a zip tie on either side of the alloy to hole it tight. two zip ties slid under the first zip ties in a loop, then two more up to the floor mount.

done forever.

OR you get long ass cable ties, an cut off a bit of a spare bit of water hose you have spae in the garage... Run the ties through the hose, then have the hose onto the hot surface and then put the cable tie's to the disired tightness perfect

Ghetto as **** lol
morton screws ftw!

 

[jono1492]

how exactly do these work? long story short, the hanger on my tailpipe is bent to **** and it's need to be cut off and replaced with something, and able to pass pits. cheers

 

[vn_v6]

be A SIICK ****, and weld ur exhaust to your body, that way when u drive, people wont think your exhasut or motor is stock cus it will vibrate and be loud, and be cool

 

[vn_v6]

Guys, you gotta realise that there is movement in the exhaust pipe, so I suggest finding an old pair of Jocks that the elastic is still good in them, This will work a treat!

Just be sure to have the skid marks on the inside!

sigg'd i "lol"ed

 

[v6lux]

sigg'd i "lol"ed

Nothing funnay about other people commenting on your skid marks dude!

 

[kane88]

aaaaaaaaaaaand sigged

 

[m05tw4nt3d]

hahahahahah